Fiat Doblo radio change vp1 to vp2

[Evron2]

Hi, This is it

[abarthmultijet]

Can you copy paste the code please, it is much easier for everyone

[Evron2]

30 38 32 35 30 32 32 35 37 34 30 4F 55 54 50 55 54 44 4A 49 54 20 15 06 17 4B 00 00 04 11 00 00 00 09 00 00 04 11 00 00 00 11 40 53 08 20 00 7C 20 00 00 00 2E 00 00 00 8C 06 0B 02 60 C0 0A 50 00 05 00 05 04 00 00 00 00 57 00 00 00 00 12 10 12 03 21 11 00 FF 00 04 00 80 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 01 00 00 85 12 00 14 00 00 00 44 00 00 00 00 00 00 00 00 0E 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 1F 00 00 3B 00 00 02 FF
Ah,got it now,hope this helps plz

[abarthmultijet]

Do you know how to run an proxy allignment? Try doing that with the existing code.

[Evron2]

Hi tried that a few times,even if the radio is disconnected it fails.
Ive changed byte 121 to 44 from 40 as suggested.I`ll do it again tomoz and put the result on.
Many thanks Evron

[Evron2]

Hers what it says

[abarthmultijet]

Try to change 123 in 05,

With or without change of 121.