Ducato 250 Gearbox

[Jo_Neu]

I installed a new engine and gearbox in the Ducato 250 3,0 Multijet 180 from 2013.
Since then, the cruise control no longer works in 4th and 6th gear!
There is probably a different translation in the manual gearbox (6th gear) than that stored in the ECU.
Can this be adjusted with MES? How and where can I do that?
Would be great if you can help me.
Thanks

[chrener]

What setup was originally in your car?
Original gearbox code and current gearbox code?
Year of production?

[Jo_Neu]

What setup was originally in your car?
Original gearbox code and current gearbox code?
Year of production?

Hi,
i dont now that. The car is from 2013 and it was a original Gearbox

[Jo_Neu]

...its great here.............

[abarthmultijet]

Go to engine and adjustments, reset self learned functions. This may help.
Also try to change the gearbox type in the proxy allignment tab at the body tab.

[Jo_Neu]

Go to engine and adjustments, reset self learned functions. This may help.
Also try to change the gearbox type in the proxy allignment tab at the body tab.

ok, but where do i have to change something?
what type should i set?

now is type "DDTC"
what types are there on the Ducato?
in the software there are type 1, type 2, type 3 etc.

[abarthmultijet]

Maybe try them al. Don't know which one to use

[shpuncik]

post your FESLog with CAN Configuration info and proxi for comparison

[Danko]

Hi, I have very similar problem. Have you managed to solve it and how?