PORT COM with ELM327

[Tinou27]

Hello !

I'm a new user of Multiecuscan and I'm French.
I have a FIAT 500 1.3 (gasoil) and I've a problem.

I connect my PC with ELM327 USB at the car with yellow connector.

But when I click "Connect", the PC says the PORT COM is not accessible, or not open ...

Do you know what is the problem ? I don't know if my driver is good, where I can download the good driver ? (Windows10)

Sorry for my bad English

Thanks

Martin

[Alfaeddy]

Hello Martin

The Driver if you need is this one

http://www.ftdichip.com/Drivers/VCP.htm


And controlling again the the same comports be used
In Control Panel, as well as in the MES settings

Greeting Eddy

Edit:

Oh, and for the engine control, ABS, steering no yellow adapter is needed

[Tinou27]

Hello Eddy !

Thanks for you reply , I test that tomorrow !

Martin

[Tinou27]

Hello !

I have download and install the good driver, and now, i have this error (in attachments)

erreurmultiecuscan.png (16.57 KiB) Viewed 7726 times

[Tinou27]

Hi !

I see this viewtopic.php?f=5&t=1493&start=10#p3808, and I have the same :'(

I have to open it and make changes? is it easier to buy another that works without "hacking"?

Thanks

Martin

[Tinou27]

Hello !

I change the driver and I have this screen : all is OK.

But when i connect the car at the ELM327, my pc have blue screen with "Kernel Secutity Check Failure"

Complicated Mulecuscan ...


Martin

[Tinou27]

Hello !

It's good ! I found the good driver, and now, I can connect my car with elm327.

But when I want to connect "Services", MES want I connect the yellow adaptator. When I connect it, MES say he can't connect the car.

Can I open the adatator for check the connections ? How "open" it ?

Thanks
Martin

[Alfaeddy]

Hello

What "good" drivers have you found?
It could have built only a chip from Silicon Laps in laptop
otherwise the driver is I have linked the right


The yellow adapter you do not need to open, easy pins after
Compare Belegunsplan alongside Supported Vehicles
pin 6 to pin 1
pin 14 to pin 9
4 + 5 are the same
also pin 16 is also equal to

Greeting Eddy