FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Hello Juanito
Have you removed the resistor is the wrong one!
Not R04
You would need to remove the red marked resistance.
Greetings Eddy
Have you removed the resistor is the wrong one!
Not R04
You would need to remove the red marked resistance.
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Hello Alfaeddy. Thanks for answers.Alfaeddy wrote:Hello Juanito
Have you removed the resistor is the wrong one!
Not R04
You would need to remove the red marked resistance.
Greetings Eddy
There's no red in the resistance of my elm.
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Ok, I'll try
Thanks again
Andrea
Thanks again
Andrea
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
juanito wrote:Hello Alfaeddy. Thanks for answers.Alfaeddy wrote:Hello Juanito
Have you removed the resistor is the wrong one!
Not R04
You would need to remove the red marked resistance.
Greetings Eddy
There's no red in the resistance of my elm.
Hello Juanito
I forgot one put the image, sorry
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Thanks for the answer but my problem is not finished
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Hello Juanito
Which Probelm?
There is but only, that is the proxy alignment OK.
And that is not necessary a realignment
And as I see yes you can also connect to the CAN setup produce.
So is your resistor problem no longer exists.
Greetings Eddy
Which Probelm?
There is but only, that is the proxy alignment OK.
And that is not necessary a realignment
And as I see yes you can also connect to the CAN setup produce.
So is your resistor problem no longer exists.
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
there is write proxy alignment is not needed. i cant execute proxy alignment procedure and i cant open cruise control light. thanks
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Hello
Since I've read that right!
Why should a proxy alignment be done?
If there is no need. !
That does not make sense, does it not?
Greetings Eddy
Since I've read that right!
Why should a proxy alignment be done?
If there is no need. !
That does not make sense, does it not?
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Hello Eddy,
just got an Vgate Scan Bluetooth Advanced OBD Scan Tool but it connects only to the engine ECU.
Some pictures attached:
Please help me identify the resistor that should be removed.
Best regards!
just got an Vgate Scan Bluetooth Advanced OBD Scan Tool but it connects only to the engine ECU.
Some pictures attached:
Please help me identify the resistor that should be removed.
Best regards!
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Hello Arheu
Very good pictures!
So does the view joy
Which vehicle would you like to read?
When it comes to the often described here CAN bus problem
you should remove the red marked resitor
Greetings Eddy
Very good pictures!
So does the view joy
Which vehicle would you like to read?
When it comes to the often described here CAN bus problem
you should remove the red marked resitor
Greetings Eddy