FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

[StiloTR]

Hello Eddy..

Greetings From Istanbul...

I have 2003 Fiat Stilo 3 D...I bought ELM -327 (bluetooth) for my car...I can't use OBD..Bluetooht ok but I can't data read...

This is the picture...




Thanx...

[Alfaeddy]

Hello Stilo TR


Remove the red marked Resitor an your BT ELM Interface can read
CAN Bus with MES


Greetings Eddy

GcMbX markiert.jpg (66.91 KiB) Viewed 7251 times

[kosalepet]

Hello Eddy . Greetings From Belarus...

I have 2007 Fiat Bravo . I bought ELM -327 (bluetooth) for my car...I can't use OBD..Bluetooht ok but I can't data read...

This is the picture... Sorry . I do not know English .

[Alfaeddy]

Hello Kosalepet

Thanks for the greetings

Your ELM interface has no disturbing resistor
it must work

check your

- Drivers
- Com port
- settings

IT must work


Greetings Eddy

[kosalepet]

Hi Eddie. Thanks for the reply. I will connect.

[INR]

Hi, I possibly have the same problem but before modifying the ELM327 thought it worth checking.

By scanning for interface, the software identifies as K-line/VAG rather than ELM 327. If I manually select the ELM 327 interface it cannot find connection.


With the K-line/VAG interface type selected, there is "no response from ECU" (ignition is on)

[Alfaeddy]

Hello

First of all, what vehicle and year you want to read?

Because several people have already soldered on your ELM interface around
and it was not necessary

Greetings Eddy

[sgorchichko]

Hi guys,

Can you help me and tell me what to cut off on my ELM 237 v1.5a which I have recently received from China.
Here are photos of my cable.



The cable is connecting to engine ok but I can't reset service interval. There is no such item in the Adjustments tab.

[Alfaeddy]

Hello Skorchichko

I can not see what is under the white plastic.
Please remove this or make pictures in which this can be seen.

Greetings Eddy

2013-06-27 10.26.17 (Custom) (2) markiert.jpg (145.93 KiB) Viewed 7163 times

[sgorchichko]

Hello Skorchichko

I can not see what is under the white plastic.
Please remove this or make pictures in which this can be seen.

Greetings Eddy

Here you go!