Connecting fes 2.6 elm 327 v1.4 with bravo mjet 07

[zippo]

I would like to know if is necessary to do the pins soldering to connect elm327 1.4 with abs, steering and body computer on my bravo 1.9 mjet 07, or i don't need to to that modification.
Many Thanks.

[s130]

Simple generic answer is that there are NO modifications for ANY CAN Based systems. Modifications are only required for those devices that use KKL/similar protocols.

Go to the "List of Support Cars" on the website and see if all your modules are CAN based. If not then mods will be required.

[zippo]

Thanks for the infos. My car is can based, but if i go to the supported car list, there is a pin modification to connect to the steering wheel for example! I'm really confused... please help me again!!

[pciu]

Hi!
Yes, Bravo is a can based and for body & airbags you don't need modification.
But for ABS, power stering you must modify elm327 to work properly.
Tested on Bravo '08 1,6 MJet

[zippo]

Thanks pciu, but which kind of pin mod for steering? Pin 9 with pin 1? I tried also to set the belt buzzer off but i receive an error message: failed to execute, (connecting like fiat stilo 1.9 jtd), why?
Many thanks!