OBDKEY interface

Multiecuscan usage help and guides
bufluca
Posts: 6
Joined: 04 Jul 2010, 08:15

Re: OBDKEY interface

Post by bufluca »

It also obdkey gave me this information, but I can also make this change me or just you?
Thanks.
Luca
lollo54
Posts: 7
Joined: 03 Apr 2010, 16:33

Re: OBDKEY interface

Post by lollo54 »

in tests with a friend buffluca we verified the features and meet all dell'obdkey as KKL is that as ELM327.
The speed of the serial (9600 only) remains low with any changes you make.
drivers we have to obdkey are old enough.
Yani, if you can send me or buffluca the drivers that utilizzani to check the speed?
Many thanks and continued his studies are the best.
Lorenzo
:D :D :D :D
bufluca
Posts: 6
Joined: 04 Jul 2010, 08:15

Re: OBDKEY interface

Post by bufluca »

Today I tried the OBDKey connected to a FIAT Stilo JTD 1900cc 2003 and FIAT Idea 1200cc 16V 2007 with a total success ... Connected to 100% on all electronic components.
Only limit the speed of 'a little slow at 9600 bps, I hope it's just a moment of development that leads to the use of the maximum performance of this interface
At first I was not so happy with my purchase ... but after waiting for the firmware interface now starting to show the first successes :mrgreen: :mrgreen: :mrgreen:
Thanks
Luca
peko
Posts: 13
Joined: 21 Nov 2010, 15:06

Re: OBDKEY interface

Post by peko »

hello friends

using vagcom or elm327 can't connect fine in all modul from cars

so better is using obdkey

say me if i 'm wrong ?

;)
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: OBDKEY interface

Post by alfa156sarajevo »

peko wrote:hello friends
using vagcom or elm327 can't connect fine in all modul from cars
so better is using obdkey
say me if i 'm wrong ?
;)
Yes they CAN!!!
Check this site: http://www.multiecuscan.net/SupportedVehiclesList.aspx
On this web site you can find which cars and their modules you can connect with FES and VAG or ELM interface!!!
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
postiglione
Posts: 3
Joined: 03 Dec 2010, 16:00

Re: OBDKEY interface

Post by postiglione »

hello I wanted to ask the Yani do I buy obdkey interface that works with firmware 1.4 :)
Last edited by postiglione on 03 Dec 2010, 16:50, edited 3 times in total.
postiglione
Posts: 3
Joined: 03 Dec 2010, 16:00

Re: OBDKEY interface

Post by postiglione »

where can I buy that will work with v1.4 obdkey Yani :) :) :) :) :) :) :)
mattydr67
Posts: 169
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: OBDKEY interface

Post by mattydr67 »

You can buy it from here: www.obdkey.com
Good luck
AAleXX
Posts: 2
Joined: 11 Jul 2011, 09:37

Re: OBDKEY interface

Post by AAleXX »

Hi, to all.
With this cable ( http://cgi.ebay.it/ws/eBayISAPI.dll?Vie ... 0623889816 ) i can access to all function with multiecuscan on my alfa 147jtd or i need some other adapters ?

Thanks ;)
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: OBDKEY interface

Post by alfa156sarajevo »

For your Alfa Romeo 147 JTD you need a ELM327 interface + you need KKL interface.

On this ebay link is shown USB KKL interface (modified) and with this cable you can access on some systems but for other systems you need an ELM 327 interface!

Read this web page: http://www.multiecuscan.net/SupportedVehiclesList.aspx
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Post Reply