OBDKEY interface

bufluca · Post by **bufluca** » 27 Oct 2010, 15:32

It also obdkey gave me this information, but I can also make this change me or just you?
Thanks.
Luca

lollo54 · Post by **lollo54** » 27 Oct 2010, 21:45

in tests with a friend buffluca we verified the features and meet all dell'obdkey as KKL is that as ELM327.
The speed of the serial (9600 only) remains low with any changes you make.
drivers we have to obdkey are old enough.
Yani, if you can send me or buffluca the drivers that utilizzani to check the speed?
Many thanks and continued his studies are the best.
Lorenzo

bufluca · Post by **bufluca** » 28 Oct 2010, 20:54

Today I tried the OBDKey connected to a FIAT Stilo JTD 1900cc 2003 and FIAT Idea 1200cc 16V 2007 with a total success ... Connected to 100% on all electronic components.
Only limit the speed of 'a little slow at 9600 bps, I hope it's just a moment of development that leads to the use of the maximum performance of this interface
At first I was not so happy with my purchase ... but after waiting for the firmware interface now starting to show the first successes

Thanks
Luca

peko · Post by **peko** » 22 Nov 2010, 08:43

hello friends

using vagcom or elm327 can't connect fine in all modul from cars

so better is using obdkey

say me if i 'm wrong ?

alfa156sarajevo · Post by **alfa156sarajevo** » 24 Nov 2010, 12:34

peko wrote:hello friends
using vagcom or elm327 can't connect fine in all modul from cars
so better is using obdkey
say me if i 'm wrong ?

Yes they CAN!!!
Check this site: http://www.multiecuscan.net/SupportedVehiclesList.aspx
On this web site you can find which cars and their modules you can connect with FES and VAG or ELM interface!!!

postiglione · Post by **postiglione** » 03 Dec 2010, 16:10

hello I wanted to ask the Yani do I buy obdkey interface that works with firmware 1.4

postiglione · Post by **postiglione** » 03 Dec 2010, 16:42

where can I buy that will work with v1.4 obdkey Yani

mattydr67 · Post by **mattydr67** » 12 Jun 2011, 14:51

You can buy it from here: www.obdkey.com
Good luck

AAleXX · Post by **AAleXX** » 11 Jul 2011, 09:38

Hi, to all.
With this cable ( http://cgi.ebay.it/ws/eBayISAPI.dll?Vie ... 0623889816 ) i can access to all function with multiecuscan on my alfa 147jtd or i need some other adapters ?

Thanks

alfa156sarajevo · Post by **alfa156sarajevo** » 11 Jul 2011, 10:58

For your Alfa Romeo 147 JTD you need a ELM327 interface + you need KKL interface.

On this ebay link is shown USB KKL interface (modified) and with this cable you can access on some systems but for other systems you need an ELM 327 interface!

Read this web page: http://www.multiecuscan.net/SupportedVehiclesList.aspx

OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface

Re: OBDKEY interface