Finaly i bought an elm 327with pic 25k80 (lot of them advertise when you know you have to find it). Work fully test, error, scan and proxi alignment. It is with 64 bit windows on 2009 500c.
But I doubt multiecuscan have the convertible module option. Or this module have no proxyalignement and no way to test his function anyway ?
To find the 120ohm resistor between pin 6 and 14 well you test continuity between the pins and then resistor you suspect
Hola!
I am trying to access to body in a alfa 147 1.6 twinspark 2004. I have an Elm327 wifi interface and can't find the famous 121ohms resistor I am supposed to remove.
Resistance between pins 6 and 14 is 50kohms (according to my multimeter).
Board is so so tiny!
Hi guys, i have just bought this elm327 clone from aliexpress, obviously cannot works with my Alfa Romeo 147 1.6 TS 16v. There are some inscriptions on the card "A-L07AJ_M", "M160421" and "M160413". I read that it was enough to remove some resistance to make it work properly. Can someone help me?
[attachment=0]index.jpg[/attachment]
Fiat Punto mk2
First registrated in 2000
1.2 8v ISO9141-2
Tryed Torque, AlfaOBD on Android and Car Scanner on Windowsphone. Car Scanner trows out a Warning "Bad ELM Clone" , Torque sticks in a loop trying to find "Model".
Hello All I am Matevz from Slovenia, Ljubljana. I have bought this elm, it says V1.5a but no labels inside. What resistor do I remove? It connects bosch electronics in alfa 159 but then nothing so I need to remove resistor. I havent seen such elm hire.
Thank you for your help!
Hello me again, is this the rigt resistor to remove? pins 6 and 14 comes out where its marked and then they share this r7 resistor. Do I remove it? I think so. Thank you! Sorry for bad picture.
Well I ordered another one this time modified for alfa from german seller.You dont know what you get from china...No response hire, just i dont know would be fine...
Hello to all
I am new at this forum and would like to thank you all for all the information you are puting here.
I have bought elm327 (becouse of info on this forum) but i can’t find any like mine. Can anybody help me with this one? Do i need also replace anything or remove?
Thank you
85D59992-CF3F-4BFE-A623-C8F512DDD27A.jpeg (1.88 MiB) Viewed 15953 times
821826D0-82DC-4A13-9182-B69C19E67FD3.jpeg (1.91 MiB) Viewed 15953 times
85D59992-CF3F-4BFE-A623-C8F512DDD27A.jpeg (1.88 MiB) Viewed 15953 times
Attachments
764F11DE-F60B-49FF-97D6-3A5EE90C43BC.jpeg (1.94 MiB) Viewed 15953 times
, Torque sticks in a loop trying to find "Model".