Jumped from 3.4 to 3.6 and DRL settings for fremont are not working anymore.
Reverting back to 3.4 and all works OK.
Still did not test 3.5
Thank you for fixing
DRL settings for freemont failure on 3.6
Re: DRL settings for freemont failure on 3.6
Hi,
I'm new to MES, but today, using version 3.6, I have sucessfully set up DRLs (high beam / Canada) on my Freemont.
The point is that actual DRLs activation command (Not Present -> Present) seems to work correctly.
The problem is that when you open the setting again (after turning it ON) it still displays "Not Present" (although DRLs are actually activated).
So looks like the issue is not about inability to turn DRLs ON or OFF but rather in wrong displaying of DRLs status.
Hope this helps.
Anyway, it would be great if this is fixed as it's really misleading.
I'm new to MES, but today, using version 3.6, I have sucessfully set up DRLs (high beam / Canada) on my Freemont.
The point is that actual DRLs activation command (Not Present -> Present) seems to work correctly.
The problem is that when you open the setting again (after turning it ON) it still displays "Not Present" (although DRLs are actually activated).
So looks like the issue is not about inability to turn DRLs ON or OFF but rather in wrong displaying of DRLs status.
Hope this helps.
Anyway, it would be great if this is fixed as it's really misleading.
Re: DRL settings for freemont failure on 3.6
Thnk you keebo,
I saw this but it is not the only problem; whatever command I try to give, I get an error ("Error during execution" or similar popup, I can't remember) and the parameters are not changed.
It is not only visual in my case.
Thank you.
I saw this but it is not the only problem; whatever command I try to give, I get an error ("Error during execution" or similar popup, I can't remember) and the parameters are not changed.
It is not only visual in my case.
Thank you.
Re: DRL settings for freemont failure on 3.6
I will do it on saturday i hope to get it done... i have a freemont.. what you guys suggest, high or low beams ?
Re: DRL settings for freemont failure on 3.6
That totally depends on your personal preference and, probably, legislation in your country.
I'm doing high beams so far
I'm doing high beams so far
Re: DRL settings for freemont failure on 3.6
anyone knows the difference between drl canada and Europe?Re: DRL settings for freemont failure on 3.6
thanks keebo im from Brazil.. maybe no legislation lol.. but should be low beans i will do it with 8v..
Re: DRL settings for freemont failure on 3.6
Nope. Already asked in another thread but the developer is silent...haffonso wrote:
Re: DRL settings for freemont failure on 3.6
I activated the DRL on my FOG lights.haffonso wrote:I will do it on saturday i hope to get it done... i have a freemont.. what you guys suggest, high or low beams ?
I changed the FOG lamps with a couple of brigth white LED lamps, excellent result for my taste.
Re: DRL settings for freemont failure on 3.6
Hello! Just enabled my DRL in low beams with 6.6V . Everything was ok and its running fine..
I'm still trying to identify Europe 1/2 and 3..
I'm still trying to identify Europe 1/2 and 3..