Hitachi ECU and KKL-usb cable

Multiecuscan usage help and guides
Espi
Posts: 9
Joined: 19 Dec 2009, 20:38

Re: Hitachi ECU and KKL-usb cable

Post by Espi »

Same problem Multiecuscan doesnt find motor ecu (Hitachi MPI).
Multiecuscanner ABS & Airbag works fine, but motor doesnt.

Thinkpad T41 & XP + Fiatecucan 1.6
USB K-line cable & 3 pin.
Marea Weekend 1.8 ELX 2000.
yani
Site Admin
Posts: 1173
Joined: 06 Nov 2009, 16:40

Re: Hitachi ECU and KKL-usb cable

Post by yani »

Hi,

I will try to include the older Hitachi version in the next realease. It seems that a lot of cars are still using it.
On the other hand when you report that your car does not connect you can also include some more info. Like: Can you connect with other software? Do you know the ISO code of your ECU? Year of manufacture as reported by eper.

As far as I know there are 3 versions of the Hitachi ECU:
1. the 1st version is before '98
2. the second version is the pre-EOBD version and it is used after '98
3. the 3rd version is the EOBD version

Each version uses different communication protocol and commands. The program currently supports 2nd and 3rd version. The 3rd version is tested and works correctly. The 2nd version is not tested and there is a little chance that I have a problem with its protocol.

Yani
joe
Posts: 1
Joined: 15 Feb 2010, 13:55

Re: Hitachi ECU and KKL-usb cable

Post by joe »

Hi Yani!
May I ask that is that 1st, and oldest Hitachi ECU used on early barchetta's (-95)?
yani
Site Admin
Posts: 1173
Joined: 06 Nov 2009, 16:40

Re: Hitachi ECU and KKL-usb cable

Post by yani »

Yes, Barchetta is using the 1st ECU until '98.

Yani
xlemon
Posts: 1
Joined: 10 Mar 2010, 08:39

Re: Hitachi ECU and KKL-usb cable

Post by xlemon »

Hi,
please include support
Hitachi ECU - 1st version is before '98 in the following versions of the program.Fiat Marea 1997. Please ,please...
Espi
Posts: 9
Joined: 19 Dec 2009, 20:38

Re: Hitachi ECU and KKL-usb cable (multiecuscan 2.0?)

Post by Espi »

Espi wrote:Same problem Multiecuscan doesnt find motor ecu (Hitachi MPI).
Multiecuscanner ABS & Airbag works fine, but motor doesnt.

Thinkpad T41 & XP + Fiatecucan 1.6
USB K-line cable & 3 pin.
Marea Weekend 1.8 ELX 2000.

Works with multiecuscan 2?
von.raven
Posts: 7
Joined: 29 Jan 2010, 01:32

Re: Hitachi ECU and KKL-usb cable

Post by von.raven »

new version 2.0 still not work with older version Hitachi eccu (95-97) :cry: (Fiat coupé 1.8 '98 with '97 eccu)
tested wiht ELM 327 1.3a and KKL VAG

version 2.1 not supported older version Hitachi eccu too :cry:

:(
von.raven
Posts: 7
Joined: 29 Jan 2010, 01:32

Re: Hitachi ECU and KKL-usb cable

Post by von.raven »

Hitachi MPI - MFI 1.8 16V 1998/01 eccu from 97
eccu code 46448638
work with Euroscan Visa 1.83
ivo_lalov
Posts: 2
Joined: 23 Nov 2010, 19:21

Re: Hitachi ECU and KKL-usb cable

Post by ivo_lalov »

Hi, version 2.5 has still no connection to the Hitachi ver 1 ECU.

The scanning finds out the ECU, but...

Engine
UNKNOWN/UNSUPPORTED
ISO Code: 45 85 83 94 B6

ABS works perfectly. Why you cannot include support for the engine?
Fiat Brava 1.8 16v 1997

Regards
Post Reply