Multiecuscan 2.1 is ready!

[yani]

I released Multiecuscan 2.1 today with the following changes:

- Translation of the yellow description messages in German
- Added support for Panda 2012
- Added information for more ISO codes from 2013/2014 and Brazil vehicles
- Fixed error details bug for IAW 8GMF, IAW 8GSF, MED 17.3.1, 8DF, 8F3
- Support for Marelli 8F3 CF5/EOBD Diesel Injection (1.3) (Linea, Strada)
- Support for Magneti Marelli IAW 5SF8 Natural Power Injection (Fiorino, Grande Punto, Punto Evo, Qubo) (Full support)
- Support for Magneti Marelli IAW 4DF Injection (Stilo 1.8 Brazil)
- Support for Parking Control VALEO (Panda 2012)
- Support for Delphi Electric Steering (Panda 2012)
- Support for Marelli 8F3 CF5/EOBD Diesel Injection (1.3) (Panda 2012)
- Support for Bosch ABS 9 (Panda 2012)

In next version we will have more support for Fiat 500 2012/2013/US and 500L, and also more engines for Panda 2012.

[us911]

Thanks for your work.

Regards
Uwe

[misaeru]

Thank you for extending support fiat Stilo 1.8 manufactured in Brazil. And it was very fast.
Support is complete, including the gearbox. I was very happy and satisfied.

Good job.

Regards!

[stefan76]

Hi, I have a Fiat Punto 2000 years, I changed the timing belt when I had the battery disconnected long time. after repair my airbag light still shines. I ordered on ebay diagnosis lines ELM yelow and green ecu is working perfectly but red is the problem cant connect . I watched the forum but I do not know what I do with that to make it work u can tell me what I should do .Thanks

[Alfaeddy]

Hi stefan76

To delete on your Punto `2000, the airbag light you need a KKL interface.
With an ELM you do not read to the airbag control unit.

Buy yourself another KKL interface (10 €) red adapter plug you've already

Then you can search for the error


Greetings Eddy

[stefan76]

Thanks Eddy , Where can I buy it you can send me pictures how it looks?

[Alfaeddy]

Hello stefan76

Here you can get the KKL

For this you need your adapter
http://www.ebay.de/itm/151015643685?ssP ... 1423.l2649

And this is switchable, so you do not need any adapter
http://www.ebay.de/itm/151015653820?ssP ... 1423.l2649

Greetings Eddy

[stefan76]

Thanks is already orderd I hope will working dosnt say its for Fiat just VW Audi Seat Skoda. Anyway thanks for info .

[Waltomatic]

Thanks is already orderd I hope will working dosnt say its for Fiat just VW Audi Seat Skoda. Anyway thanks for info .

YES (like Eddy said), if shoud have problems yet, try this... forum.multiecuscan.net/viewtopic.php?f=5&t=1493&p=14847#p14826

[ChrisRob]

Vani -- I just purchased a license for Multiecuscan 2.1. I also have a yellow adapter cable on order from a seller in the UK (via eBay).

I have a 2013 Fiat 500 Abarth with a blinking odometer, post after market stereo install. Looks like it needs CAN proxi re-alignment. I could probably have the local Fiat service "studio" take care of it but would like the ability to do it myself. I am using a LYL ELM 327/OBD (WiFi) interface which I confimed prior to purchase successfully connects and works with Multiecuscan v2.1.

I look forward to the upcoming Multiecuscan release (2.2?) which as you mentioned above, includes more support for Fiat 500 2012/2013/US (I am in the US).

Thanks!
Chris