FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

[lolo85v]

Photo of brooches

On this version there is that 3 sons(threads)?

http://i69.servimg.com/u/f69/13/77/86/13/20130412.jpg

[Alfaeddy]

Hi Lolo58v

I dont understand what you show me with this picture

What ist Brooches ???

And Sorry its an Resistor not Resistance

Greetings Eddy

[Alfaeddy]

Hello Boris

This ist a nice picture

I was playing with macro settings

yes , remove R6 (121) and your Interface can read CAN Bus with Multiecuscan

Red frame in the last picture

Greetings Eddy

Works OK
Thanks!!!

Hi Boris

Its nice wenn i can Help you

and Marko ist Beautyfull

And a nice work with your Interface

Greetings Eddy

[lolo85v]

They are the sons(threads) of the grip(taking) odb

[Alfaeddy]

Hello Lolo85v

What's on your picture I know
only for what you want to show me this picture
I do not understand?


Greetings Eddy

[lolo85v]

This image is the grip(taking) odb it is normal that he(it) is there that 3 sons(threads) can be the problem comes of her(it)?

http://i69.servimg.com/u/f69/13/77/86/13/20130413.jpg

[Alfaeddy]

Hi Lolo85v

Now I understand what you mean

CAN signals go through pin 6 + 14 on the OBD connector
CAN CAN high + low

On your picture I can not see the pins are assigned 6 + 14?
I do not think so? or?

Then it is as I have written previously been
your interface can not read CAN bus

Greetings Eddy

[lolo85v]

He(It) is to bancher that on pine 16-7 et 5

http://i69.servimg.com/u/f69/13/77/86/13/20130414.jpg

Thus I can put them has the trash can?

[Alfaeddy]

Hi Lolo85v

Yes
take part in the garbage

Greetings Eddy

[lolo85v]

OK I have another elm and case plastic explosive but not of conection moteur also
http://i69.servimg.com/u/f69/13/77/86/13/20130415.jpg

COMMAND: ATZ
RESPONSE:

ELM327 v1.5

>

COMMAND: ATI
RESPONSE: ATI

ELM327 v1.5

>

COMMAND: ATE0
RESPONSE: ATE0

OK

>

COMMAND: ATL0
RESPONSE: OK

>

COMMAND: ATH0
RESPONSE: OK

>

COMMAND: ATSPC
RESPONSE: OK

>

COMMAND: ATS0
RESPONSE: OK

>

COMMAND: ATCAF0
RESPONSE: OK

>

COMMAND: ATCFC0
RESPONSE: OK

>

COMMAND: ATCRA 7B0
RESPONSE: OK

>

COMMAND: ATSH 7B0
RESPONSE: OK

>

COMMAND: ATAT1
RESPONSE: OK

>

COMMAND: ATST41
RESPONSE: OK

>

COMMAND: ATBI
RESPONSE: OK

>

This interface is compatible with ELM 327 1.4! Should connect properly with all CAN modules.