FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Multiecuscan usage help and guides
lolo85v
Posts: 35
Joined: 27 Sep 2012, 18:09

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by lolo85v »

Photo of brooches

On this version there is that 3 sons(threads)?

http://i69.servimg.com/u/f69/13/77/86/13/20130412.jpg
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

Hi Lolo58v

I dont understand what you show me with this picture

What ist Brooches ??? :oops:

And Sorry its an Resistor not Resistance :)

Greetings Eddy
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

Boris wrote:
Alfaeddy wrote:Hello Boris

This ist a nice picture :D
I was playing with macro settings :-)

Alfaeddy wrote: yes , remove R6 (121) and your Interface can read CAN Bus with Multiecuscan

Red frame in the last picture

Greetings Eddy
Works OK
Thanks!!!
:D

Hi Boris

Its nice wenn i can Help you

and Marko ist Beautyfull :D

And a nice work with your Interface

Greetings Eddy
lolo85v
Posts: 35
Joined: 27 Sep 2012, 18:09

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by lolo85v »

They are the sons(threads) of the grip(taking) odb
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

Hello Lolo85v

What's on your picture I know
only for what you want to show me this picture
I do not understand?


Greetings Eddy
lolo85v
Posts: 35
Joined: 27 Sep 2012, 18:09

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by lolo85v »

This image is the grip(taking) odb it is normal that he(it) is there that 3 sons(threads) can be the problem comes of her(it)?

http://i69.servimg.com/u/f69/13/77/86/13/20130413.jpg
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

Hi Lolo85v

Now I understand what you mean :)

CAN signals go through pin 6 + 14 on the OBD connector
CAN CAN high + low

On your picture I can not see the pins are assigned 6 + 14?
I do not think so? or?

Then it is as I have written previously been
your interface can not read CAN bus

Greetings Eddy
lolo85v
Posts: 35
Joined: 27 Sep 2012, 18:09

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by lolo85v »

He(It) is to bancher that on pine 16-7 et 5

http://i69.servimg.com/u/f69/13/77/86/13/20130414.jpg

Thus I can put them has the trash can?
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

Hi Lolo85v

Yes
take part in the garbage

Greetings Eddy
lolo85v
Posts: 35
Joined: 27 Sep 2012, 18:09

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by lolo85v »

OK I have another elm and case plastic explosive but not of conection moteur also
http://i69.servimg.com/u/f69/13/77/86/13/20130415.jpg

COMMAND: ATZ
RESPONSE:

ELM327 v1.5

>

COMMAND: ATI
RESPONSE: ATI

ELM327 v1.5

>

COMMAND: ATE0
RESPONSE: ATE0

OK

>

COMMAND: ATL0
RESPONSE: OK

>

COMMAND: ATH0
RESPONSE: OK

>

COMMAND: ATSPC
RESPONSE: OK

>

COMMAND: ATS0
RESPONSE: OK

>

COMMAND: ATCAF0
RESPONSE: OK

>

COMMAND: ATCFC0
RESPONSE: OK

>

COMMAND: ATCRA 7B0
RESPONSE: OK

>

COMMAND: ATSH 7B0
RESPONSE: OK

>

COMMAND: ATAT1
RESPONSE: OK

>

COMMAND: ATST41
RESPONSE: OK

>

COMMAND: ATBI
RESPONSE: OK

>

This interface is compatible with ELM 327 1.4! Should connect properly with all CAN modules.
Post Reply