software purchse

General support messages
Post Reply
rafi532
Posts: 17
Joined: 23 Aug 2010, 10:44

software purchse

Post by rafi532 »

hi,
I own 147 1.6 120hp and I'm about to buy the multiecuscan software in order to fix flashing odometer and maybe for another functions that I'll find usful.
I have simple OBD-II cable that connent properly with the free version but can't connect the airbags (and one more function that I don't remember right now).
I'd like which cable I car order that will connenct to all elements that the software support ?
s130
Posts: 997
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: software purchse

Post by s130 »

According to the Supported Vehicle Data page on the website then your air bag requires a simple KKL (VAG Com) cable and adaptor cable / modification.

Suggest you read this page:

http://www.multiecuscan.net/SupportedVehiclesList.aspx

to understand what is supported and what hardware is required.

Also the see the Authorised Distributors page:

http://www.multiecuscan.net/Distributors.aspx

Hardware packages, components, leads etc. bought from these source are known to work with no issues.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus
rafi532
Posts: 17
Joined: 23 Aug 2010, 10:44

Re: software purchse

Post by rafi532 »

Can I be sure that this cable will work fine:
http://www.obdspecialist.it/dettagli.as ... z2BBti2Twh
s130
Posts: 997
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: software purchse

Post by s130 »

I should work OK and also has the advantage of already being modified for the different pin connetions being required.

It is unusual for a KKL cable to not work correctly unless it uses an odd USB to Serial conversion chipset and drivers.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus
rafi532
Posts: 17
Joined: 23 Aug 2010, 10:44

Re: software purchse

Post by rafi532 »

For the avoidance of doubt, is this interface (KKL) support special functions such as PROXY ALIGMENT ?
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: software purchse

Post by Alfaeddy »

Hello

Reading with this KKL interface you can ABS, Airbag and ECU on your Alfa 147
But it is not for the Proxi Aligm. / Reset service etc. suitable.
For this you need an ELM, or OBDkey CANtie Interface

But no KKL

Greetings Eddy
rafi532
Posts: 17
Joined: 23 Aug 2010, 10:44

Re: software purchse

Post by rafi532 »

Can you recommand on specific cable that will do it.
I know there are links here but I'd like to buy the cheapest cable that can do the special fuctions,
instad of asking every time that I found something that I think it's ok.
s130
Posts: 997
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: software purchse

Post by s130 »

You ask a hard question about recommendation.

I gave you the Authorised sellers links.

I use and can therefore recommend Gendan products for UK.

Other people will use 'other' makes/products and will likewise recommend what they use is they have had no problems.

I don't believe anybody has compiled a chart of known working devices vs devices that work with mods (mostly cheap Chinese clone kit) vs devices that don't work at all.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus
Post Reply