Airbag Fiat stilo JTD with ELM327 modified

[glariture]

hello,

here I would like connected to the airbag computer in my fiat stilo jtd 2003, for this I use a ELM327 change with pin 3 and 1 link. but when connecting I can not put you need a VAGCOM or OBDKEY.

But the site says with ELM327

es that I can then completely disable the airbags in seats because I mounted the seats bacquet

[Alfaeddy]

Hello

In the list have all Fiat Stilo one My99 Airbag System
and can only be read with a KKL interface or OBDkey

With your ELM 327 does not come on the control

Greetings Eddy

[alfa156sarajevo]

Yes! Alfaeddy is right!
You need KL interface to connect airbag ECU and your Fiat Stilo...

[glariture]

So what I need cable? have found on the internet?

?? http://cgi.ebay.fr/Interface-USB-VAG-KK ... 231a987ebc

it's good ?

[Alfaeddy]

Hello
Yes this is the correct cable (KKL interface)
You'll need to have an adapter cable 2 for the airbag control unit
or the interface has to be rebuilt.

Question at this dealer (Mr. Ulbricht) to, he can also provide you the adapter cable.

Greetings Eddy

[glariture]

forgive me my English very bad, I can not be all inclusive.

the refore the KKL cable should however must be the change Rellier to pin 3 and 1 or buy an adapter.

[Alfaeddy]

Hello

My english is bad

Properly for this KKL you still need the adapter

Adapter 1 = ABS etc.
Adapter 2 = Airbag

Alternatively, it may also be converted so that it works without an adapter.


Greetings Eddy