So I got a 2008 Lancia Ypsilon as daily (to spare my Giulia from that). It's the 1.2 8V with 60HP and the production is from June 2008. I'm doing some maintenance, but I'm confused about the choice of the model into MES... There's Y 1.2 Y 1.2/CF3 Ypsilon 1.2 8V Ypsilon '06 1.2 8V Ypsilon 2011 1.2 8V...

bart wrote: ↑12 Jun 2024, 12:48 Hello

Can somebody write the correct number for PDC module with support front parking sensors compatible with Giulia?

For mine, which is the October 2017 version, it worked perfectly with the m.n. 50538367

If you put the 3rd gen ETM you need to replace also the climate control module with the newer one... doubt HVAC module has something to do with PDC not showing up on display. if it could be something then maybe instrument cluster needs to be from MY20 too. It has, already tested from people that mo...

Hi! PDC Sensor adjustment is here: - Byte 118 = 80 only 4 rear sensors - Byte 118 = 90 front and rear 8 sensors I have a problem with the sensors and the 3d generation ETM, after installed the 2020 infotainment (touch veraion) on my 2017 veloce the sensors stops working, initially I thought it was ...

Hi @GenTLe, I am planning to do this on two cars, a 2019 Stelvio 280HP and a 2021 Giulia Q. Thank you for the three step process described. May I ask, if I understood well: -Step 1 and Step 2 can be done with MultiEcuScan? - Step 3 cannot be done with MES? Thank you! Peter Hi Peter, Step 1 has noth...

Hello, I'm in process to change the cooland of my Giulia (but this is valid for Stelvio too) and, while for the main engine cooling circuit there's no need to have OBD special functions, for the secondary circuit (the one that cools down both the turbocharger and the intercooler) the FCA workshop ma...

byte 59 should determine key fob type. as for byte 126 values "A0" and "80" both can be used. just "A0" disables after-wipe. it could be that something is still missing to make Panic mode work. I think I got the issue: to have panic to work you need a proper brand new ...

try and report: set your byte 126 from "00" to "80" it that doesn't work try also set byte 59 from "59" to "5A" So, I got back ad the car, put 126 byte at 80: nothing. Also to changed 59 byte from 59 to 5A: again no luck... By the way, what is the 59 byte set...

try and report: set your byte 126 from "00" to "80" it that doesn't work try also set byte 59 from "59" to "5A" So, as suggested by someone in the USA Giuliaforums I tried to put byte 126 from 00 to A0 and it didn't work. Another guy wrote that A0 also disabl...

Good afternoon, I am from Italy, and recently bought and activated an USA key with remote start and panic buttons. I successfully activated the remote start (see here: http://forum.multiecuscan.net/viewtopic.php?f=4&t=8315&p=24157#p24157 ) and, by reading instruction on the USA owner manual,...