Invalid ISO

Report any bugs found in Multiecuscan and suggest new functionality to be implemented
Post Reply
guri300
Posts: 3
Joined: 21 May 2023, 05:11

Invalid ISO

Post by guri300 »

I tried to get Srt Performance Pages in 2018 chrysler 300s.
But it shows warning that it has invalid ISO. And nothing works for the car. Any help?
fangz007
Posts: 2
Joined: 29 Sep 2023, 01:36

Re: Invalid ISO

Post by fangz007 »

I have a 2018 300c and I had to get a bypass and connect the ELM 327 through the trunk. The HUGE problem is the logo SRT is the only thing that is new on my uconnect screen. I'm also waiting for HELP.
guri300
Posts: 3
Joined: 21 May 2023, 05:11

Re: Invalid ISO

Post by guri300 »

Obd2 Cable for FCA 12 8 Gateway... https://www.amazon.ca/dp/B0C1YGJ96S?ref=ppx_pop_mob_ap_share

You need to get this tool and connect it under the steering wheel not in obd port

https://youtu.be/FYj-nMOnrfQ?si=3Fqk7xrAMmRevjyy

See this video for reference you’ll get SRT logo and Srt font in speedometer. Add performance pages and reset uconnect by holding power and tune button you’ll get pages in odometer and uconnect screen
fangz007
Posts: 2
Joined: 29 Sep 2023, 01:36

Re: Invalid ISO

Post by fangz007 »

Thank you for the information, but I did everything that you stated multiple times even. The performance pages are still not present.
Post Reply