Page 1 of 1
ELM -> ABS, TRW, Airbag
Posted: 06 Apr 2010, 18:10
by beton
Good day
I have question.
How to force interface ELM to transport from ABS, TRW, Airbag. Stilo 1,9 JTD 16V?. It should was one unite pin so as in VAG?
Re: ELM -> ABS, TRW, Airbag
Posted: 08 Apr 2010, 02:23
by BR-Scan
beton wrote:Good day
I have question.
How to force interface ELM to transport from ABS, TRW, Airbag. Stilo 1,9 JTD 16V?. It should was one unite pin so as in VAG?
Good question! I want to know that too. Have you tried without making a bridge?
Re: ELM -> ABS, TRW, Airbag
Posted: 08 Apr 2010, 05:37
by yani
HI,
There is no way to connect without physical connection!
Yes, you need to modify your ELM interface and bridge the pins.
You cannot connect to airbags with ELM. It is a limitation of ELM 327 v1.3.
Yani
Re: ELM -> ABS, TRW, Airbag
Posted: 08 Apr 2010, 15:40
by BR-Scan
yani wrote:HI,
There is no way to connect without physical connection!
Yes, you need to modify your ELM interface and bridge the pins.
You cannot connect to airbags with ELM. It is a limitation of ELM 327 v1.3.
Yani
Thank you Yani. I felt that the ELM327 is much more stable than the KKL, so can I bridge the pins 7 and 1 in my ELM327 to access the ABS? Would it work? I've done that to my KKL interface but not sure I can do it to the ELM.
My ELM327 version is 1.2a, should I bother buying a 1.3 or 1.5?
Re: ELM -> ABS, TRW, Airbag
Posted: 16 Apr 2010, 22:59
by EnIgMa
if you have the 1.2 version wait a little longer and buy a version 1.4 instead.
1.3 is almost old.
Re: ELM -> ABS, TRW, Airbag
Posted: 17 Apr 2010, 09:11
by Alchemy
ELM Version 1.5 What is this?
Re: ELM -> ABS, TRW, Airbag
Posted: 17 Apr 2010, 10:13
by EnIgMa
fake/clone version of elm327 1.3 version.
Re: ELM -> ABS, TRW, Airbag
Posted: 17 Apr 2010, 12:31
by Alchemy
thanks
I find 1.4