Multiecuscan

Hello,

car:
Alfa 159 QTronic 2,4

It is not possible to set the new Injector codes.
The software said all is successfull but the new codes are not stored.

Here the log:

ECU ISO Code: FD 86 BF 04 9B
21.02.2015 14:49:29
CONNECTED TO:
Alfa Romeo 159 2.4 JTDm 20V
Bosch EDC16C39 CF4/EOBD Diesel Injection (1.9, 2.4)
--------------------------------------------------------------

ISO-Code: FD 86 BF 04 9B
FIAT-Zeichnngsnummer: 51883485
Hardware-Nummer: 0281012146
Hardware-Version: 00
Software-Nummer: 1037507414
Software-Version: 3841
Zulassungsnummer: 93952
Datum der Programmierung: 06/16/2010

LESE PARAMETER:
Code Einspritzdüse Zylinder 1:

LESE PARAMETER:
Code Einspritzdüse Zylinder 1: AR1WF6CAA

LESE PARAMETER:
Code Einspritzdüse Zylinder 1: AR1WF6CAA

LESE PARAMETER:
Code Einspritzdüse Zylinder 1: AR1WF6CAA

LESE PARAMETER:
Code Einspritzdüse Zylinder 1: AR1WF6CAA

LESE PARAMETER:
Code Einspritzdüse Zylinder 1: AR1WF6CAA

AUSFÜHREN EINSTELLUNG ...
Code Einspritzdüse Zylinder 1
Alter Wert: AR1WF6CAA
Neuer Wert: A81Z8X7AA
FERTIG

Attached also the log after restart the ignition.

Dont use ELM, it will not work. Try kkl cable.

Yep KKL was the final hint also from Yani via Mail. Working perfectly now.