Page 1 of 1
Brava 1.2 parametrers
Posted: 01 Mar 2010, 20:02
by kecka
Hi,Yani
No problem contacting the car Brava 1.2, but when I give parameters to the program immediately disconnects ?????
The airbag, ABS is not a problem, it works well
Here is the type of ECU:
Re: Brava 1.2 parametrers
Posted: 01 Mar 2010, 20:16
by klimekkk
The airbag, ABS is not a problem, it works well
What you mean - no problem with your car or no problem with connecting? If second question then how you connect to ABS?
Re: Brava 1.2 parametrers
Posted: 01 Mar 2010, 20:33
by kecka
Connection to ABS, airbag no problem ,works well ....... Only the ECU engine problem. after choosing any live data immediately disconnected from the ECU ........
Re: Brava 1.2 parametrers
Posted: 02 Mar 2010, 07:38
by klimekkk
Good news but tell me please how do you connect to ABS if version 1,6 not support ABS in Bravo/Brava.
I have problem with my ABS in Bravo and I'm looking for any soft for this...
Re: Brava 1.2 parametrers
Posted: 02 Mar 2010, 13:01
by kecka
Sorry for bad wording. I have no problem with connection of Brava 1,2 to Airbag, the engine connect, but after setting of parameter measurement disconnect immediately. Other engines e.g. JTD works correctly. I have tried ABS to Stilo and there also wasn’t a problem with the connection.
Re: Brava 1.2 parametrers
Posted: 03 Mar 2010, 05:53
by 182
kecka wrote:Sorry for bad wording. I have no problem with connection of Brava 1,2 to Airbag, the engine connect, but after setting of parameter measurement disconnect immediately. Other engines e.g. JTD works correctly. I have tried ABS to Stilo and there also wasn’t a problem with the connection.
Greetings, have understood with communication breakage on 1.2.у me too most after start break.help.
Re: Brava 1.2 parametrers
Posted: 03 Mar 2010, 05:58
by yani
182 wrote:kecka wrote:Sorry for bad wording. I have no problem with connection of Brava 1,2 to Airbag, the engine connect, but after setting of parameter measurement disconnect immediately. Other engines e.g. JTD works correctly. I have tried ABS to Stilo and there also wasn’t a problem with the connection.
Greetings, have understood with communication breakage on 1.2.у me too most after start break.help.
Hi,
Connect ONLY pin 7 of your obd connector and try again. It is possible that some other ECU is interfering with the communication...
Which paramater were you trying to read when it disconnected?
Yani
Re: Brava 1.2 parametrers
Posted: 03 Mar 2010, 06:17
by 182
yani wrote:182 wrote:kecka wrote:Sorry for bad wording. I have no problem with connection of Brava 1,2 to Airbag, the engine connect, but after setting of parameter measurement disconnect immediately. Other engines e.g. JTD works correctly. I have tried ABS to Stilo and there also wasn’t a problem with the connection.
Greetings, have understood with communication breakage on 1.2.у me too most after start break.help.
Hi,
Connect ONLY pin 7 of your obd connector and try again. It is possible that some other ECU is interfering with the communication...
Which paramater were you trying to read when it disconnected?
Yani
At me 3 pin a socket, a k-line and "-"? 3 pin the empty. Does not read idle running, an impulse of spray jets and another - breaks.когда the engine works in general there is no joint
Re: Brava 1.2 parametrers
Posted: 03 Mar 2010, 07:08
by kecka
Brava 1.2 still has the 3 pin connector.... So there might not be a problem
Re: Brava 1.2 parametrers
Posted: 03 Mar 2010, 07:19
by 182
kecka wrote:Brava 1.2 still has the 3 pin connector.... So there might not be a problem
Not to do it is more attempt посоветуете.может business in the adapter.он it is made not at factory, and it is bought on the Internet of Masterkit ВМ 9213.
I tried UniDiag all too most.