Multiecuscan

I released Multiecuscan 2.1 today with the following changes:

- Translation of the yellow description messages in German
- Added support for Panda 2012
- Added information for more ISO codes from 2013/2014 and Brazil vehicles
- Fixed error details bug for IAW 8GMF, IAW 8GSF, MED 17.3.1, 8DF, 8F3
- Support for Marelli 8F3 CF5/EOBD Diesel Injection (1.3) (Linea, Strada)
- Support for Magneti Marelli IAW 5SF8 Natural Power Injection (Fiorino, Grande Punto, Punto Evo, Qubo) (Full support)
- Support for Magneti Marelli IAW 4DF Injection (Stilo 1.8 Brazil)
- Support for Parking Control VALEO (Panda 2012)
- Support for Delphi Electric Steering (Panda 2012)
- Support for Marelli 8F3 CF5/EOBD Diesel Injection (1.3) (Panda 2012)
- Support for Bosch ABS 9 (Panda 2012)

In next version we will have more support for Fiat 500 2012/2013/US and 500L, and also more engines for Panda 2012.

Thanks for your work.

Regards
Uwe

Thank you for extending support fiat Stilo 1.8 manufactured in Brazil. And it was very fast.
Support is complete, including the gearbox. I was very happy and satisfied.

Good job.

Regards!

Hi, I have a Fiat Punto 2000 years, I changed the timing belt when I had the battery disconnected long time. after repair my airbag light still shines. I ordered on ebay diagnosis lines ELM yelow and green ecu is working perfectly but red is the problem cant connect . I watched the forum but I do not know what I do with that to make it work u can tell me what I should do .Thanks

Hi stefan76

To delete on your Punto `2000, the airbag light you need a KKL interface.
With an ELM you do not read to the airbag control unit.

Buy yourself another KKL interface (10 €) red adapter plug you've already

Then you can search for the error


Greetings Eddy

Thanks Eddy , Where can I buy it you can send me pictures how it looks?

Hello stefan76

Here you can get the KKL

For this you need your adapter
http://www.ebay.de/itm/151015643685?ssP ... 1423.l2649

And this is switchable, so you do not need any adapter
http://www.ebay.de/itm/151015653820?ssP ... 1423.l2649

Greetings Eddy

Thanks is already orderd I hope will working dosnt say its for Fiat just VW Audi Seat Skoda. Anyway thanks for info .

stefan76 wrote:Thanks is already orderd I hope will working dosnt say its for Fiat just VW Audi Seat Skoda. Anyway thanks for info .

YES (like Eddy said), if shoud have problems yet, try this... forum.multiecuscan.net/viewtopic.php?f=5&t=1493&p=14847#p14826

Vani -- I just purchased a license for Multiecuscan 2.1. I also have a yellow adapter cable on order from a seller in the UK (via eBay).

I have a 2013 Fiat 500 Abarth with a blinking odometer, post after market stereo install. Looks like it needs CAN proxi re-alignment. I could probably have the local Fiat service "studio" take care of it but would like the ability to do it myself. I am using a LYL ELM 327/OBD (WiFi) interface which I confimed prior to purchase successfully connects and works with Multiecuscan v2.1.

I look forward to the upcoming Multiecuscan release (2.2?) which as you mentioned above, includes more support for Fiat 500 2012/2013/US (I am in the US).

Thanks!
Chris