Multiecuscan

hello,

here I would like connected to the airbag computer in my fiat stilo jtd 2003, for this I use a ELM327 change with pin 3 and 1 link. but when connecting I can not put you need a VAGCOM or OBDKEY.

But the site says with ELM327

es that I can then completely disable the airbags in seats because I mounted the seats bacquet

Hello

In the list have all Fiat Stilo one My99 Airbag System
and can only be read with a KKL interface or OBDkey

With your ELM 327 does not come on the control

Greetings Eddy

Yes! Alfaeddy is right!
You need KL interface to connect airbag ECU and your Fiat Stilo...

So what I need cable? have found on the internet?

?? http://cgi.ebay.fr/Interface-USB-VAG-KK ... 231a987ebc

it's good ?

Hello
Yes this is the correct cable (KKL interface)
You'll need to have an adapter cable 2 for the airbag control unit
or the interface has to be rebuilt.

Question at this dealer (Mr. Ulbricht) to, he can also provide you the adapter cable.

Greetings Eddy

forgive me my English very bad, I can not be all inclusive.

the refore the KKL cable should however must be the change Rellier to pin 3 and 1 or buy an adapter.

Hello

My english is bad

Properly for this KKL you still need the adapter

Adapter 1 = ABS etc.
Adapter 2 = Airbag

Alternatively, it may also be converted so that it works without an adapter.


Greetings Eddy