Multiecuscan

hi yani
i,m happy to write that i have used your soft on my car stilo mw 1.6 16v 2003 to test engine ecu
i have used the usb -- agv 4000 exp version in the kkl modus on my asus netbook (Com6)
direct great result on screen ,thanx

my agv4000 11protocol (and can emulate elm functionality)
see stange distribution (or tunerpro24) for the agv4000 info
i use mostly modiag (expert) on the agv4000(real good eobd soft)
runs on canbus on my stilo

update :tested with dip selector (k line 7 to pin *.* )
dip pin on = 1 eobd ABS , connection ok
dip pin on = 3 eobd airbag , connection ok
dip pin on = 7 eobd engine , connection ok
dip pin on = 9 eobd electric powerstering , connection NO !!! on my car ????

need advice for connection to stilo powerstering

wilco1v (holland)

You have to disconnect cable from pin7 to connect to powerstering.

BAS

bas wrote:You have to disconnect cable from pin7 to connect to powerstering.

BAS

hi bas
k line 7 was already diverted to pin 9 >>> powerstering still no readings for me

thanx any way

greets wilco1v

wilco1v wrote:

bas wrote:You have to disconnect cable from pin7 to connect to powerstering.

BAS

hi bas
k line 7 was already diverted to pin 9 >>> powerstering still no readings for me

thanx any way

greets wilco1v

Strangely, for me (Vag kkl) disconnecting from the other pins solved the problem.

BAS