Multiecuscan

Hi,
What kind of car should I select to connect with my Lancia Musa 1.3 mjet 16v 95cv?

I use multiecuscan 3.3 and ELM 327 v. 1.4b

Bye.

If you are not sure which engine ECU you have
- Marelli 6F3 EOBD Diesel Injection (1.3)
or
- Marelli 6JF EOBD Diesel Injection (1.3)

just press F11 (Scan button) and FES software will tell you what kind of engine ECU you have...
or you can find other Fiat car models who have 1.3mjet engine and try to coznect with that.
you can not lose nothing...

See photo...

I tried it, the response was:

Scansione ...

Controllo Motore
UNKNOWN/UNSUPPORTED
ISO Code: 68 07 3B 08 07

AirBag
TRW MY03 Airbag (2F-2P-2T-I)
ISO Code: EA 07 9B 86 67

Elettronica Centrale
Marelli Body Computer (3)
ISO Code: 40 83 45 08 E5

Strumentazione
Marelli Instrument Panel (Comfort)
ISO Code: 32 83 16 83 23

COMPLETATO

Ok, so your engine ECU is Marelli 8DF CF5. Unfortunately, it is not supported in Multiecuscan yet.

yani wrote:Ok, so your engine ECU is Marelli 8DF CF5. Unfortunately, it is not supported in Multiecuscan yet.

I hope it will be in Multiecuscan version 3.4.3

yani wrote:Ok, so your engine ECU is Marelli 8DF CF5. Unfortunately, it is not supported in Multiecuscan yet.

from official site:

...
Currentntly supported ECUs:
See Supported Vehicles section for a complete list of supported modules on each make/model

Engine Management
- Bosch EDC15
- Bosch EDC15C7
- Bosch EDC16/CF3 Multijet
- Bosch EDC16/CF4 Multijet
- Bosch EDC16/CF5 Multijet
- Marelli 6JF Multijet
- Marelli 6F3 Multijet
- Marelli 8DF/CF5 Multijet
- Bosch MSA 11
- Lucas DPNC TD100
- Lucas EPIC DCU3F
....

This support is for Fiat 500, Grande Punto and Mito.
Unfortunately, the control unit in Musa is a little different and it is not supported yet. You have to check http://www.multiecuscan.net/SupportedVehiclesList.aspx for details about each car make/model/version