Multiecuscan

Alfa Romeo 156 2.4L 2001my Engine wont start. No DTC's, rail pressure OK, Engine rev OK but no start..
Any help is welcome!
B. R.
Darko

Try to check connectors on relays... Open the hood and close to battery should be some relays!
Just unplug them and plug them back! You can do it one by one!
If you have some kind spray which can clean the connectors, just spray on the contacts - relay board...

alfa156sarajevo wrote:Try to check connectors on relays... Open the hood and close to battery should be some relays!
Just unplug them and plug them back! You can do it one by one!
If you have some kind spray which can clean the connectors, just spray on the contacts - relay board...

thanks for help, but still no joy..

try to disconnect the tube that is connected to the intake and throw a bit of choke, and starts putting the hose if a part of this occasion, the car can go from one center to show pompista Bosch injectors

Maybe it is a Crankshaft position sensor (CKP) OR camshaft position sensor (CMP)!

But I think it is the first one! When JTD engine won’t start usually it is CKP sensor...

crank sensor with out doubt

Solved!

All 5 injectors was blocked becose of bad fuel...

B.R.
Darko