Multiecuscan

Hi All

I've just done the CAN alignment procedure with multiecuscan on my 2.0 Alfa 147 as I have the flashing odometer issue and the log files say that the dashboard failed with the error below.

Writing to module: Dashboard Node (NQS)FAILED!

The full log file is copied below but can anybody suggest what the problem might be with the dashboard to cause this error?

Many thanks

Paul

Log file below:


Reading CAN configuration data ...
CAN CONFIGURATION DATA:
00 00 17 6B 00 00 17 6B 00 00 00 41 00 00 00 00 00 00 00 00 00
00 00 17 6B 00 00 07 09 00 00 17 6B 00 00 07 09 00 00 07 01 00
34 36 37 39 33 39 32 36 20 20 20 44 54 53 49 45 45 50 44 45 20 20 00 07 11 6B 17 00 00 09 07 00 00 49 00 00 82 26 07
CURRENTLY CONFIGURED CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Dashboard Node (NQS)
Receiver Radio/Radio Navigator Node (NRR/RMN)
Brake System Node (NFR)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Steering Angle Sensor Node (NAS)
CURRENTLY AVAILABLE CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Dashboard Node (NQS)
Receiver Radio/Radio Navigator Node (NRR/RMN)
Brake System Node (NFR)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Steering Angle Sensor Node (NAS)
CAN MODULES THAT REQUIRE EOL PROGRAMMING:
Body Computer Node (NBC)
Dashboard Node (NQS)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
21/01/2011 12:12:09
CONNECTED TO:
ALFA 147 2.0 TS 16V
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------

CURRENTLY CONFIGURED CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Dashboard Node (NQS):
Receiver Radio/Radio Navigator Node (NRR/RMN):
Brake System Node (NFR):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Steering Angle Sensor Node (NAS):
:
CURRENTLY AVAILABLE CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Dashboard Node (NQS):
Receiver Radio/Radio Navigator Node (NRR/RMN):
Brake System Node (NFR):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Steering Angle Sensor Node (NAS):
:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer Node (NBC):
Dashboard Node (NQS):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):

EXECUTING ADJUSTMENT...
PROXI Alignment Procedure
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC)SUCCESS!
Writing to module: Dashboard Node (NQS)FAILED!
Writing to module: Driver Door Node (NPG)SUCCESS!
Writing to module: Boot Node (NVB)SUCCESS!
Writing to module: Climate Control Node (NCL)SUCCESS!
FAILED TO EXECUTE

sponcom wrote:Hi All

I've just done the CAN alignment procedure with multiecuscan on my 2.0 Alfa 147 as I have the flashing odometer issue and the log files say that the dashboard failed with the error below.

Writing to module: Dashboard Node (NQS)FAILED!

The full log file is copied below but can anybody suggest what the problem might be with the dashboard to cause this error?

Many thanks

Paul

There is a BUG in FES ver. 2.6.1! I had the same problem! Just send a e-mail or private message to Yani and he will help you!