Page 1 of 1
where find an elmc19 cable adapt??
Posted: 28 Dec 2010, 16:54
by moviz
Like the title, i ask to every one who know, where i can find and buy an elm c19 cable adaptor?? i prefer don't mod my original elm 237, but an adaptor cable is perfect!...thanks
Re: where find an elmc19 cable adapt??
Posted: 03 Jan 2011, 07:59
by mattydr67
If you need this kind of adaptor you can make it by yourself.
What you need it is to buy from ebay or whereever you want ( but I did it from ebay.com ) an OBD II female and an OBD II male.
Put item together and you will do the connection like here
http://www.multiecuscan.net/SupportedVehiclesList.aspx
Look one of the links from ebay form where I purchase in the past
http://cgi.ebay.com/OBD2-16-Pin-Female- ... 2c59be43f2
http://cgi.ebay.com/16-Pin-Vehicle-OBD- ... 2c59d96601
I did it but I used an DIP switch that becaasue I didn't want to make 3 adaptors, one for ECU, EPS, ABS, one for AIrBag, and one for this Fiat Can pin changes.
Good luck
Re: where find an elmc19 cable adapt??
Posted: 04 Jan 2011, 16:48
by dallas140cv
If I connect can pins to a 4-way dip switch, enabling can bus on 1-9 o 6-14 alternatively (moving pins in couple), will the interface work properly or not? I'm not able to find the male-female connectors for the three adaptors... Thank you!
Re: where find an elmc19 cable adapt??
Posted: 15 Jan 2011, 20:50
by gargamella
http://www.skylight75.it/obd/
than go to "diagnosi auto"
select fiat
and there's a kit with both 3 adaptors
bye Lorenzo
Re: where find an elmc19 cable adapt??
Posted: 15 Jan 2011, 20:57
by fiatbravoemotion
moviz wrote:Like the title, i ask to every one who know, where i can find and buy an elm c19 cable adaptor?? i prefer don't mod my original elm 237, but an adaptor cable is perfect!...thanks
Make it yourself. I searched few weeks in shops this adapter, sellers didn't understand what I want, etc. I bought male and female adapters, connected all wires, cut the cover, used a glue to connect two parts to one and now I have an adapter. In Poland female and male adaptors costs about 4 or 5 Euro. My ELM C19 adapter in attachement.
- elmc19_3.jpg (171.18 KiB) Viewed 4673 times
- elmc19_1.jpg (170.92 KiB) Viewed 4673 times
Re: where find an elmc19 cable adapt??
Posted: 17 Jan 2011, 18:05
by Juggers2k
For the people in the UK, Gendan have just updated their Multiecuscan kits to include the 3 adaptor cables.
The adaptors on their own are here:
http://www.gendan.co.uk/product_FESCBL.html
They also do full bundles with and without FES licenses:
http://www.gendan.co.uk/product_FESPKG.html
http://www.gendan.co.uk/product_FESHW.html