Multiecuscan

About Delta instruments in my Bravo http://www.youtube.com/watch?v=xg4_HzYEDrA

In real this view is most beautiful

Klusek wrote:

yani wrote:Please try the new version 2.6.1. It should fix the problems with PROXI Procedure.

I have this problem too with Stilo 1,9 JTD.
In attachment is the log of the alignment.

P.S. Sorry for my english

Standard error in Stilo Don't worry about it. What would you like to do with Proxy Alignment? What device you added that you need proxy alignment?

fiatbravoemotion wrote:Standard error in Stilo Don't worry about it. What would you like to do with Proxy Alignment? What device you added that you need proxy alignment?

It's not my car. In my car does not need to do alignment. This is my friend's car. He mentioned the air conditioning panel and now odometer is blinking. This is not a big problem, but I wanted to fix it.

I've done the proxy alignment on my Bravo'08.

NEW CAN MODULES::
Info-Telematikus/Convergence csomópont (NIT/NCV):
:
REMOVED CAN MODULES::
Rádióvevõ/Rádiós navigaátor térképekkel (NRR/RMN):
:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer (Karosszéria v.e. - NBC):
Mûszerfal (NQS):
Légkondicionáló (NCL):
Légzsák csomópont (NAB):

EXECUTING ADJUSTMENT...
Proxi sorbarendezési (összehangolási) eljárás
Writing CAN configuration data ...
Writing to module: Body Computer (Karosszéria v.e. - NBC)SUCCESS!
Writing to module: Mûszerfal (NQS)SUCCESS!
Writing to module: Légkondicionáló (NCL)SUCCESS!
Writing to module: Légzsák csomópont (NAB)SUCCESS!
KESZ

Thanks Yani

Done it too with success today.

Thanks a lot!
I activated the cruise control

but it didn't ask me for the electronic code...

Hello Yani, I have a painting tool Lancia Ypsilon year 2003, which sometimes does not work correttamento making a diagnosis on the network Can I be absent from the instrument panel so I wanted to do a trial Proxi alignment, but it makes me do I sent the report 2 times the 15.02.2012, I would say that the car was not supported, can you tell me if it is so and if I have to wait for a new release of multiecuscan.
regards Mik