Will try with version 4.6
As the recent 4.7 version,and the in I already have tried with, is described with: fixing issues with proxy alignment on Stelvio models and added new procy configurations
my hope is limited.
wrong iso code?
Re: wrong iso code?
Version 4.6 and 4.5 same issue.
So I will try the OBD protect ELM327 cable then
So I will try the OBD protect ELM327 cable then
Re: wrong iso code?
I bought a 2014 500 Abarth at auction and I am sorting through a host of things including a crank but no-start situation.
I'm getting a BCM "UNKNOWN/UNSUPPORTED" report for my Fiat 500 Abarth. I'm connecting with a OBDLink SX USB cable. The following is reported when I scan for modules:
Body / BCM (Body Computer Module)
UNKNOWN/UNSUPPORTED
ISO Code: 40 83 6B 8A 0D
VIN code: 3C3CFFFH4ET164877
Hardware number: P500L1EU304 - Ver: 03
Software number: 28427037 - Ver: 0503
I am new to MulitECUScan. Does this mean the BCM is bad? (which could cause the no-start?)
I'm getting a BCM "UNKNOWN/UNSUPPORTED" report for my Fiat 500 Abarth. I'm connecting with a OBDLink SX USB cable. The following is reported when I scan for modules:
Body / BCM (Body Computer Module)
UNKNOWN/UNSUPPORTED
ISO Code: 40 83 6B 8A 0D
VIN code: 3C3CFFFH4ET164877
Hardware number: P500L1EU304 - Ver: 03
Software number: 28427037 - Ver: 0503
I am new to MulitECUScan. Does this mean the BCM is bad? (which could cause the no-start?)