Dear All,
Using the multiecuscan I could check two errors on my Alfa abs ecu as follow:
- Rear right speed sensor not feasible
- Front left load solenoid valve low value
Can anyone tell me how to solve these problems?
Regards,
Joaquim
Alfa Romeo 166 2.0 Turbo Super ABS errors
Re: Alfa Romeo 166 2.0 Turbo Super ABS errors
Rear right speed sensor would be the ABS wheel speed sensor I imagine.
If you connect to the ABS controller with FES and choose Parameters, you can view the output from the wheel speed sensors. Select all 4 wheels then roll/drive the car forward slowly watching all 4 values (for safety, get someone else to monitor it if you're driving!).
If you're going in a straight line, all 4 wheels should show the same speed.
If one doesn't, then that wheel speed sensor is reading incorrectly. Likely to be either a poor connection, or a faulty sensor (also check the ring that it reads against for damage).
If you connect to the ABS controller with FES and choose Parameters, you can view the output from the wheel speed sensors. Select all 4 wheels then roll/drive the car forward slowly watching all 4 values (for safety, get someone else to monitor it if you're driving!).
If you're going in a straight line, all 4 wheels should show the same speed.
If one doesn't, then that wheel speed sensor is reading incorrectly. Likely to be either a poor connection, or a faulty sensor (also check the ring that it reads against for damage).
2008 Fiat Grande Punto 1.4 8v Eleganza
-
alfa156sarajevo
- Posts: 870
- Joined: 12 Feb 2010, 09:03
- Location: EU, Germany
Re: Alfa Romeo 166 2.0 Turbo Super ABS errors
I agree with Juggers2k!
Just do not drive above 20km/h because ABS will disconnect from FES!
Just do not drive above 20km/h because ABS will disconnect from FES!
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars