Well, there is probably noise (or bad earth) or low power or something else with the CAN network of the vehicle.angelootacon wrote: prejudice today, or try 2 interfaciue elm does not work and gives the same error ELM 327! Original!
yani wrote:Well, there is probably noise (or bad earth) or low power or something else with the CAN network of the vehicle.angelootacon wrote: prejudice today, or try 2 interfaciue elm does not work and gives the same error ELM 327! Original!
Send me a report after the problem (using the red Send Report button). I will double check in the report to be sure that the problem is in the software or hardware.
yani wrote:Well, there is probably noise (or bad earth) or low power or something else with the CAN network of the vehicle.angelootacon wrote: prejudice today, or try 2 interfaciue elm does not work and gives the same error ELM 327! Original!
Send me a report after the problem (using the red Send Report button). I will double check in the report to be sure that the problem is in the software or hardware.
Yes, the PROXI procedure works fine on Punto '99 and Punto '03.michelespl wrote:I threw 50 in euro license multiecuscan thinking that place actually post allineamanto proxy on fiat punto mk2b MJT 2003, with latest multiecuscan elm1.4b official and the procedure begins and ends, but always display flashing dash! anyone tried on this car
Sorry, I did not see your messages here in this thread.angelootacon wrote: prejudice aspect News
you solved?
yani wrote:Sorry, I did not see your messages here in this thread.angelootacon wrote: prejudice aspect News
you solved?
Anyway, I saw the report from your car and it cannot be programmed with standard PROXI procedure. The body computer appears to be virgin/unprogrammed. It needs a different programming procedure before doing PROXI alignment.
Why do you want to do PROXI alignment? Do you have any problem with the car?
FESLog_1105191934_FIAT PUNTO '03 1.3 JTD.txt FESLog_1105191930_FIAT PUNTO '03 1.3 JTD.txt