NEW VAGCOM 106.1 COMPATIBLE WITH F.E.S OR NOT?

Multiecuscan usage help and guides
Post Reply
barc006
Posts: 1
Joined: 23 Nov 2010, 08:23

NEW VAGCOM 106.1 COMPATIBLE WITH F.E.S OR NOT?

Post by barc006 »

Hi im new here..just joined the forum and want to say hello

i have little bit problem.i just to know about vagcom106.1 cable..i know this cable new and used dual K-line..this cable compatible with F.E.S or not? hope someone to help me:?:

sorry bad english :mrgreen:



thank for help :D
kdijagnostika
Posts: 2
Joined: 17 Jun 2010, 01:28
Location: Osijek, Croatia
Contact:

Re: NEW VAGCOM 106.1 COMPATIBLE WITH F.E.S OR NOT?

Post by kdijagnostika »

NO, it isn't

You must use KL/KKL interface that work with older version of VAG-COM software ( < 5xx.x )
KDijagnostika.hr
CROATIA
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: NEW VAGCOM 106.1 COMPATIBLE WITH F.E.S OR NOT?

Post by alfa156sarajevo »

kdijagnostika wrote:NO, it isn't

You must use KL/KKL interface that work with older version of VAG-COM software ( < 5xx.x )
i agree with kdijagnostika
you need a VAG COM KKL 409.1 interface (cable) for FES software! ;)
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Russ
Posts: 1
Joined: 14 Feb 2011, 16:08

Re: NEW VAGCOM 106.1 COMPATIBLE WITH F.E.S OR NOT?

Post by Russ »

Hi Guys
I am new here and to FES.
Will a Genuine VAG cable work on FES.
I have a HEX COM Intelligent Dual K Iso interface.
I have tried it but am having no luck communicating to a palio IAW 49F

thanks
And Great forum
Russ
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: NEW VAGCOM 106.1 COMPATIBLE WITH F.E.S OR NOT?

Post by alfa156sarajevo »

I do not htink that your HEX CAn cable will work! :roll:

You need a VAG COM KKL 409.1 interface (cable) for FES software! ;)
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
kdijagnostika
Posts: 2
Joined: 17 Jun 2010, 01:28
Location: Osijek, Croatia
Contact:

Re: NEW VAGCOM 106.1 COMPATIBLE WITH F.E.S OR NOT?

Post by kdijagnostika »

Russ wrote:Hi Guys
I am new here and to FES.
Will a Genuine VAG cable work on FES.
I have a HEX COM Intelligent Dual K Iso interface.
I have tried it but am having no luck communicating to a palio IAW 49F

thanks
And Great forum
Russ
No, it wont work. You need simply KL interface that just convert voltage of logic 0 and 1 from computer (-5V - +5V) to voltage needed by car diagnostic port (12V - 0V). This is dummy interface without MCU or memory and can be constructed with few simple electronic component. HEX interfaces (original or clone) are more sophisticated peace of electronic and can be used with only one diagnostic software. This interfaces are in the fact small computers programed to get command from VCDS diagnostic software installed on PC, process it and send them to car computer through diagnostic link conector (DLC). When Multiecuscan try to send signal to car computer directly through HEX interface they cannot reach it because signal stop on HEX interface MCU chip.

KDijagnostika
KDijagnostika.hr
CROATIA
Post Reply