USB VAG COM INTERFACE

[EMILIO13]

Hi all !
I have a problem with the USB VAG COM interface ! I want to know if it is possible to use the Multiecuscan programm with the USB port ? I am working under WINDOWS 7.
Many thanks for your help.
Forza Italia

[alfa156sarajevo]

Yes it is possible to use Multiecuscan programm with the USB port!
What kind of VAG KKL cable do you have? USB or SERIAL?

[EMILIO13]

I have USB cable but the program do not recognize it !!!!!! Have to change something in the parameters ???

[lenivec]

have you install correct driver?

[alfa156sarajevo]

So did you install all drivers that came with this VAC COM USB cable?
If you did installed all the drivers for VAG COM you just need to modify the com port! Go to Start>Control Panel>System>Hardware>Device Manager>Ports> and than set the settings as shown on web page: http://www.multiecuscan.net/HowToUse.aspx!!!
After that you need to modify you VAG COM cable so can connect to ABS, AIRBAG or ENGINE ECU.
See this web page: viewtopic.php?f=5&t=255!!!
Cheers

[peko]

hi friends

he must also solder pins ?

anybody can say wihch pin shint with which pin ?

thank you

[alfa156sarajevo]

more info you can find here: viewtopic.php?f=5&t=255!!!