Panda 1.2 power steering connection fail

General support messages
Post Reply
Alex099
Posts: 3
Joined: 04 Sep 2010, 07:47

Panda 1.2 power steering connection fail

Post by Alex099 »

Hey guys!

Got a trouble when was trying to connect to Panda 1.2 EPS, it says "ECU doesn't respond"
I tried also get connection to Engine, Airbag and ABS. Engine is OK. Airbag and ABS got fails.

Then I putted together 1, 3, 7 and 9 pins on the OBD plug.
After that I've got connection to Airbag. But still got nothing for power steering...

Any idea?

FES 2.3.1
VAG KKL 4.09
Port speed is "9600"
Latency is "1"

Thanx,
Alex
Last edited by Alex099 on 09 Sep 2010, 16:09, edited 1 time in total.
Top
croydonchris
Posts: 25
Joined: 16 Aug 2010, 10:14
Location: South London

Re: Panda 1.2 power steering connection fail

Post by croydonchris »

I have a Panda 1.2 8V but I have to set my ELM327 to 38400 to connect to the ABS as the ABS ECU will not connect at 9600 baud but the engine ECU will.
I hope this is of use to you.
Regards ~ Chris
Last edited by croydonchris on 16 Oct 2010, 23:37, edited 3 times in total.
Top
Fiatmaniac
Posts: 9
Joined: 11 Sep 2010, 21:57

Re: Panda 1.2 power steering connection fail

Post by Fiatmaniac »

What ECU?
IAW?
Top
Post Reply

Return to “Support”