elm 327 1,4a timeout...

Multiecuscan usage help and guides
Post Reply
spider99
Posts: 5
Joined: 20 Jun 2010, 08:30

elm 327 1,4a timeout...

Post by spider99 »

Code: Select all

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300464930130&ssPageName=ADME:X:AAQ:GB:1123#ht_6701wt_1137
its not working conection time out please help?
Do i need the car power for the test ( test buton in setup)
Tipiak
Posts: 7
Joined: 26 Dec 2009, 22:07

Re: elm 327 1,4a timeout...

Post by Tipiak »

Same problem here with ELM327 1.4a, test in settings works fine. I don't have a timeout but i says to check my cable

While with KKl cable, it works fine
Tipiak
Posts: 7
Joined: 26 Dec 2009, 22:07

Re: elm 327 1,4a timeout...

Post by Tipiak »

Image
spider99
Posts: 5
Joined: 20 Jun 2010, 08:30

@ Yani

Post by spider99 »

Today test. all ok.
ebay seller is ok.
christianttjones

http://cgi.ebay.co.uk/ELM-327-USB-1-4a- ... 119wt_1139

Today I bought and tested the program with this cable works perfectly. (and the kkl)

@ Yani,
1 question I have here an Alfa GT jtd of 2005 with 202,000 on the clock but the odo in the software gives 1.799.6 km? Software 2002 is also strange
What is the cause?
Please comment.

Yani thanks for this wonderful program.
sprint750
Posts: 4
Joined: 01 Oct 2010, 23:51

Re: elm 327 1,4a timeout...

Post by sprint750 »

Bought also my interface from him. (1.4 working fine !!)
Everything was great. Very professional seller.

Regards
Sébastien
A pessimistic is a former optimistic who gathered experience
Psychik
Posts: 6
Joined: 31 Aug 2010, 19:23

Re: elm 327 1,4a timeout...

Post by Psychik »

i have bought ELM 327 1.4+ as on picture downside. :mrgreen:
this device was alredy modified for Fiat. there were changes like on picture below.
i check resistor and they were 100 Ohm both. i have no multimeter to check capacitors.

but there was a problem. each time i plug this interface into my car (Punto HGT 1.8 16V Faza3) i receive errors in main computer and CAN bus transmision stuck until i remove elm327 and restart power from key.
also there was a lot of unnecesary lights, gasoline-meter light was blinking and shows no gas.

Image

i decide to broke into elm and remove this additional parts like this:

Image

now everything works fine in my car. i have to test this ELM with other fiat's. :)
sebfri
Posts: 12
Joined: 29 Oct 2010, 20:58

Re: elm 327 1,4a timeout...

Post by sebfri »

sprint750 wrote:Bought also my interface from him. (1.4 working fine !!)
Everything was great. Very professional seller.

Regards
Sébastien
I bought ELM 327 by christianttjones in eBay, that's work for engine but doesn't work in service maintenance reset.

Do you try it in service reset ?
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: elm 327 1,4a timeout...

Post by alfa156sarajevo »

sebfri wrote:
sprint750 wrote:Bought also my interface from him. (1.4 working fine !!)
Everything was great. Very professional seller.
Regards
Sébastien
I bought ELM 327 by christianttjones in eBay, that's work for engine but doesn't work in service maintenance reset.
Do you try it in service reset ?
sebfri
do you have REGISTERED version of FES?
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
sebfri
Posts: 12
Joined: 29 Oct 2010, 20:58

Re: elm 327 1,4a timeout...

Post by sebfri »

Yes of course !!!
Post Reply