Hello, I bought KKL 409.2 but I do not have any drivers I can pass them?
Another thing to run well and set the KKL how can I do?
Thanks!
KKL 409.2
Re: KKL 409.2
The drivers for a kkl interface like VagCom you find here
http://www.ftdichip.com/Drivers/CDM/CDM ... tified.zip
Better is to set the interface on virtual com ports between 1 and 4 and set the lattency at 2 (it is recomanded by ftdichip.com) not at 1 ( how all we know before).
Lattency you can set : right click on your com port - properties - advance - latency ( default is 16 and you must change it at 2)
Good luck
http://www.ftdichip.com/Drivers/CDM/CDM ... tified.zip
Better is to set the interface on virtual com ports between 1 and 4 and set the lattency at 2 (it is recomanded by ftdichip.com) not at 1 ( how all we know before).
Lattency you can set : right click on your com port - properties - advance - latency ( default is 16 and you must change it at 2)
Good luck
Re: KKL 409.2
Thank you for your help!