Fiat 500(l)/(X) Android auto

[koszyk]

Hello,

I have completed to its reaches 235 bytes and Apply configuration below, the ETM it's now ok. But I have a trouble with automatic gearbox (TCM/NCA/NCR) EOL failed and gearbox doesn't works.

Do you have any idea?

Thanks in advance for your help.


Byte 115= 02
Byte 121= 40 Navi
Byte 121= 44 Navi+Audio
Byte 123= D5 Dab
Byte 130= 01 Fiat logo
Byte 130= 05 Abarth logo
Byte 148= 05 Uconnect 7

Carplay, Android:

Byte 157= 01 CarPlay
Byte 158= 00
Byte 159= 00
Byte 160= 01

Hi, did you solve the problem with AT9?

[yann500]

Hello,

Sorry, Not yet.

Yann

[mokumaniak]

Hi, I upgraded my uconnect 6.5 to 7 inches
I will reallign the proxy. I need to activate carplay on my 500X 2016 1,4 140 cv gasoline and the rear camera
do you think that the informations above can be good for my 500X
thx

[andreslopez93]

Hello,

Sorry, Not yet.

Yann

Hi Yann, any updates on this topic? The same thing happened to me recently.
Thanks for your help

[Koplinjp]

And I think it should be 7" Uconnect device.
Another point that should be discovered, are there any hardware differences between devices with and without AA/ACP.

yes, it must be 7", i think 98% of the devices share same hardware with and w/o AA, like the Tipo

I've read the proxi from another 500L with 7" Uconnect with Apple Carplay/Android Auto, Rear view camera and Parking Sensors:
33 31 33 33 30 30 34 31 32 34 36 4F 55 54 50 55 54 2D 53 49 54 20 17 11 15 4F 0C 00 05 10 00 00 00 09 04 00 05 10 00 00 00 A7 C7 71 07 85 00 37 00 30 A0 44 06 00 07 08 8C 03 15 01 28 C2 00 D1 02 35 41 0A 0C 0D 00 80 3E 58 00 02 00 00 43 20 29 03 08 11 16 00 86 20 05 05 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 CB 00 01 08 0E 00 04 80 10 00 10 80 00 01 40 10 95 00 11 00 00 49 00 01 14 40 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

My 500L with 7" Uconnect with Rear view camera only:
33 31 33 33 30 30 34 38 36 35 36 4F 55 54 50 55 54 2D 53 49 54 20 17 11 15 4F 0C 00 04 10 00 00 00 09 04 00 04 10 00 00 00 A7 C7 71 07 85 00 37 00 30 20 44 06 00 07 08 8C 03 15 01 28 C2 00 D1 02 35 41 0A 0C 0D 00 80 3E 58 00 02 00 00 43 20 29 03 08 11 16 00 86 20 05 05 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 CB 00 01 08 0E 00 04 80 10 00 10 00 00 01 40 00 85 00 11 00 00 49 00 01 14 40 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

It has 10 bytes which are different.
The ISO code, Hardware and Software numbers of Uconnect are the same.

Good evening.
I do know that this is a bit old, but on the first proxy (proxi from another 500L with 7" Uconnect with Apple Carplay/Android Auto, Rear view camera and Parking Sensors), that car has automatic heaslights, do you remember? How can i know what proxy bytes are for that specific “thing” (automatic headlights), cornering lights and tear view camera?