Ducato 250 , Steering angle sensor check with MES

[dinogebiss]

My Ducato 250 Display show up some failure , like .... Hill Holder , ESC not availabale.
I made with the MES the calibration of the longitudinal /lateral acceleration sensor and for
the steering angle sensor. After those calibration procedure I can see the graph diagram in the MES parameter function when I shake the car.
But I don´t see an graph reaction in the MES parameter when I turn the steering wheel.
No failure report during steering angle sensor calibration, but no reaction in the parameter graph funtion. ( steering angle sensor enabled during test )
Must I fit a new steering angle sensor in my car.

[dinogebiss]

Soryy, I cheched today the steering angle sensor agin. Now I can see the signal graph in the MES data window when I turn the steering.
Maybe I made yesterday something wrong in MES settings.