Lancia Delta proxy alignment

General support messages
Post Reply
Costa1927
Posts: 7
Joined: 04 May 2020, 22:16

Lancia Delta proxy alignment

Post by Costa1927 »

Hi everyone my name is Costantino and I am new in the forum I need your help.
In practice I am the owner of a silver Lancia Delta from 2011 and over the years I have added several original lancia accessories (Poltrona Frau seats, 17 wheels, Instant nav, blue & me, rear parking sensors) and I have a problem with alignment proxy with the instant nav and the display of the parking sensors graphics, the first gives me an error waiting time although with the replacement of the bits everything also works the my car function, instead the parking sensors after I enable the display with multiecuscan they no longer work and the control unit lamp on the odometer display lights up.
Grazie.
shpuncik
Posts: 360
Joined: 19 Oct 2018, 16:43

Re: Lancia Delta proxy alignment

Post by shpuncik »

It could be that with rear parking sensors you don't have display. At least that's how it is on 159 - with rear sensors no display, with front+rear you can turn on parking display
Costa1927
Posts: 7
Joined: 04 May 2020, 22:16

Re: Lancia Delta proxy alignment

Post by Costa1927 »

in the giulietta changing the bit 118 from 00 to 80 the display indicates the rear graphics and if you bring it the same bit to 90 the display shows the whole car as in the photo posted.
shpuncik
Posts: 360
Joined: 19 Oct 2018, 16:43

Re: Lancia Delta proxy alignment

Post by shpuncik »

your car is closer related to Fiat Bravo platform from 2007 than Giulietta so I guess proxi should be similar to Bravo, not Giulietta
Costa1927
Posts: 7
Joined: 04 May 2020, 22:16

Re: Lancia Delta proxy alignment

Post by Costa1927 »

It is true that it comes from the good platform but I can assure you that the Giulietta was also built on the same platform until 2014.
in fact many parts are the same.
engine control units instant nav blue & me.
I sell spare parts on ebay
shpuncik
Posts: 360
Joined: 19 Oct 2018, 16:43

Re: Lancia Delta proxy alignment

Post by shpuncik »

How large is your proxi? Can you post it here or PM as I don't have Delta to compare
Costa1927
Posts: 7
Joined: 04 May 2020, 22:16

Re: Lancia Delta proxy alignment

Post by Costa1927 »

with multiecuscan proxy alignment ctrl alt c and here is my reading.
30 34 35 37 33 4F 55 54 50 55 54 2D 4A 49 54 20 10 01 11 EF 00 00 05 A9 00 00 04 C1 00 00 07 8F 2B 16 00 00 08 9C 06 01 46 03 2E 00 81 0C 33 00 64 00 00 02 00 00 00 00 00 36 51 0A 0C 01 00 00 00 3A 21 B8 82 00

by changing the 81 to 91 the Sport mode is enabled
shpuncik
Posts: 360
Joined: 19 Oct 2018, 16:43

Re: Lancia Delta proxy alignment

Post by shpuncik »

you're missing six bytes in front.
will check later what I've got
Costa1927
Posts: 7
Joined: 04 May 2020, 22:16

Re: Lancia Delta proxy alignment

Post by Costa1927 »

you are a big one, thank you very much waiting for you.
Costa1927
Posts: 7
Joined: 04 May 2020, 22:16

Re: Lancia Delta proxy alignment

Post by Costa1927 »

hello didn't you find anything? :D
Post Reply