Abarth Boost Gauge

[nenes78]

Hello. I have a 2013 Fiat 500 Abarth (USA model). I recently installed the TFT cluster from a 2015 Fiat Sport. I fixed the mileage, adjusted the display to Abarth setting 60(tested byte 65 at 00 20 40 as well). Did the proxialign and the Boost gauge does not work on any cluster setting. If I plug back the old cluster it works fine. Is there a setting I’m missing in MES? Any help would be appreciated. Thank you.

[snowbound_sonic]

Hi, does the whole gauge not work or just the Shift/Sport light in the centre (not sure which you guys have in USA)?

[nenes78]

the whole gauge does not work. The light does not come on with the rest of the lights either.

[tobiasR]

HI Depending on the date of the tft dash you have installed the Boost Gauge may be fine in normal mode but constantly lit up like mine on sports mode (i have shift up on my 2009 car) I believe the only solution is to purchase a boost gauge from a european 595 originally equipped with the tft dash. some people have said this actually works without any further change, just swap out the gauges.

I think if you change the custom proxi data to a abarth dashboard you can get the boost gauge to work on the abarth setting but only in normal mode. The gauge cuts out completely on other non abarth modes as per my research.

[romanoaf]

Hi there, I'm in the same situation, the boost gauge doesn't work even with the TFT dash set to "60" abarth- is there a hex edit to enable the factory boost gauge? Would anyone be willing to share a picture of their ctrl-alt-c hex edit window from the proxy screen so that I can compare?

Thanks in advance

[hildevar]

Hi there, I'm in the same situation, the boost gauge doesn't work even with the TFT dash set to "60" abarth- is there a hex edit to enable the factory boost gauge? Would anyone be willing to share a picture of their ctrl-alt-c hex edit window from the proxy screen so that I can compare?

Thanks in advance

Did you find something? See in another forum that you made a list of the codes, can you share it?

[vgra]

I am the op. I purchased a 2016 boost gauge and still no signals to it. I recently purchased a 2017 Abarth TFT and both boost gauges now work.

My only issue is the menu no longer has all the functions such as Hill Assist, time, date, speed buzzer, etc. It only has Trip B, Buzzer volume and Shift Light. I asked on fiat500usaforum.com and was told to ask Yani to look at my custom Proxi, another user said he had a similar issue and Yani helped correct it. I would like the speed buzzer and date and time to work again. The Hill assist is working in the car I just can't access the menu for it.

Here is my Proxi after installing the 2017 TFT.

31 33 31 35 37 33 34 30 37 30 30 31 32 33 34 35 36 37 38 39 30 20 12
11 15 4F 84 00 04 11 00 00 00 09 00 00 00 11 00 00 00 81 D2 4D 06 F4
00 01 71 BA 05 00 67 00 09 00 84 03 00 02 00 01 A0 10 60 00 00 00 00
00 00 00 00 27 00 00 00 00 31 06 B1 01 00 00 68

If anyone has info on how to get the menus back it would be much appreciated.

[mladjo79]

hello, i have the same problem after installing tft 2018 on my abarth 2011 as you also explained, lack of menus etc ... did you manage to solve your problem and how ?? thanks ....

[vgra]

No never figured it out. I have a 2015 blue and me cluster from a non abarth that shows all the menus, but has no boost gauge signal. The other cluster I have is from a 2017 Abarth and it powers on both the 2017 boost gauge and 2013, but loose all the menu functionality. From What i have read the stereo in the newer cars talk to the cluster and sends the info such as time and date etc.

I'm probably going to stick to the Blue and cluster and put in an aftermarket boost gauge.

[robi80]

with tft of 2015 on abarth 2010, turbo always on.
have you found a solution on the byte to change? a thousand thanks