Enable/Disable Race mode for non-Quadrifoglio Giulia

Report any bugs found in Multiecuscan and suggest new functionality to be implemented
Post Reply
JeBizzle
Posts: 5
Joined: 11 Jun 2019, 02:14

Enable/Disable Race mode for non-Quadrifoglio Giulia

Post by JeBizzle »

There is currently some work being done to identify which bits in the PROXI Alignment data to alter in order to turn on Race mode on the Giulia. This of course coincides with at proper RDNA selector being installed.
davidetricomi
Posts: 4
Joined: 04 Jan 2018, 21:56

Re: Enable/Disable Race mode for non-Quadrifoglio Giulia

Post by davidetricomi »

Bit 88 from AC to CC?
or
Bit 88 from A8 to C8?
JeBizzle
Posts: 5
Joined: 11 Jun 2019, 02:14

Re: Enable/Disable Race mode for non-Quadrifoglio Giulia

Post by JeBizzle »

For my North American 2018 Giulia Ti Sport Q4 2.0T (280HP petrol) I can do one of the following things to byte 88:

CC in byte 88 enables Race mode:
  • Disables ESC/FCW
  • ABS is still enabled
  • Changes the center display to Race mode that shows MPH in larger font and a shift light. (shift light doesn't actually work, probably due to shift point RPM)
  • Sets the accelerator pedal mapping to Normal mode. It's a much more linear pedal mapping, which is better for use on a track. Normal pedal mapping is the only setting across all modes now though, DNA&R use Normal
EC in byte 88:
  • ESC/FCW is disabled.
  • I believe that it also affects the accelerator mapping (Normal) like the Race mode does.
Post Reply