Hi
I have uploaded for Fiat but I can not make any connection what should I do?
I installed the original MultiCuscan and the latest firmware.
But there is no connection with the vehicle anymore.
Hit the head of the head....
orj Firmware
http://www.tiecar.net/support.html
CANtieCAR v2.x Bluetooth ready ::. (my device series)
viewtopic.php?t=4975
according to these instructions
For all CANtieCAR v2.x interfaces:
1. Download the latest CANtieCAR firmware from http://tiecar.net/CANtieCAR2_Firmware_RC and extract the firmware file from the archive (it should be CANtieCAR2_RC_BW02021050_FW02023672.rfw)
2. Connect the CANtieCAR interface to the USB port of the computer (only to the computer and not to car)
3. Open the flash drive of the CANtieCAR and execute the CANtieCAR Configurator program (it is named CANtieCAR.EXE)
4. Select the correct COM port from the drop-down list of ports and click “Search” (the program will show information about the connected interface)
5. Now select “Update” on top (the program will show the CANtieCAR firmware update options)
6. Click the “…” button and select the file with new firmware (CANtieCAR2_RC_BW02021050_FW02023672.rfw)
7. Click “Run” and wait till the update process finishes and lights on the interface stop to flash (it is less than a minute)
8. Now select “Settings” on top and then click the “Search” button again (the “Firmware” number on bottom should change to 2.0.3672)
9. In the table of modes double-click on “MultiECUScan (FiatECUScan v3.4+)”
10. Close this program…
please help me ?