Missing menus from TFT display - Abarth 500

[snowbound_sonic]

This is not the secret of new graphics.
I have the bodycomputer of a 500 Abarth restyling experimental that still has the old graphics and the byte 65 is always 20.

What happens if you change Byte 65 to the value 60 using the restyling BCM?

If I set it to 60, it's always the same as it was at 20 or 30.
These trials, however, have always made them on the bench, not on the car.

Have a look at http://500crew.com/forum/viewtopic.php?f=23&t=1354 where the OP has done a list of displays/graphic themes.

[alex-et3]

What happens if you change Byte 65 to the value 60 using the restyling BCM?

If I set it to 60, it's always the same as it was at 20 or 30.
These trials, however, have always made them on the bench, not on the car.

Have a look at http://500crew.com/forum/viewtopic.php?f=23&t=1354 where the OP has done a list of displays/graphic themes.

Interesting, thank you!

[ja_bacardi]

hi to all,

i will like to know if its posible to activate the missing functions with this model of radio?

20171202_183005.jpg (2.48 MiB) Viewed 26081 times

20171202_183215.jpg (2.11 MiB) Viewed 26081 times

[alex-et3]

Hi!no,only with uconnect 5 or 7hd

[ja_bacardi]

Hi!no,only with uconnect 5 or 7hd

thanks, i`m having the same trouble everyone else with the missing menu.

[alex-et3]

Hi!no,only with uconnect 5 or 7hd

thanks, i`m having the same trouble everyone else with the missing menu.

This happens because you buy the wrong speedometer ...

[ja_bacardi]

Hi!no,only with uconnect 5 or 7hd

thanks, i`m having the same trouble everyone else with the missing menu.

This happens because you buy the wrong speedometer ...

Yes i realized that after reading this thread, but i wonder would it be possible to plug the analog speedo through the obd plug like the uconnect?

[alex-et3]

thanks, i`m having the same trouble everyone else with the missing menu.

This happens because you buy the wrong speedometer ...

Yes i realized that after reading this thread, but i wonder would it be possible to plug the analog speedo through the obd plug like the uconnect?

No, because the digital speedometer was born to dialogue only with the uconnect.

[Zwierzak]

I had similar problem with Panda 2 and connect nav. After proxi with retrofitted connect nav all menu were transfered to connect nav. When you made proxi without connect nav everything was back. Maybe try to disconnect your uconnect and make normal proxi, and compare to your custom proxi with connected uConnect?

[alex-et3]

I had similar problem with Panda 2 and connect nav. After proxi with retrofitted connect nav all menu were transfered to connect nav. When you made proxi without connect nav everything was back. Maybe try to disconnect your uconnect and make normal proxi, and compare to your custom proxi with connected uConnect?

No, I've already tried.
In the 500 tft changes the software between new versions with uconnect and old versions with blue and me.
In your car instead it is possible because your car could be born with car radio or radionav and then the odometer is set according to the option.