FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Multiecuscan usage help and guides
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

anonimo76 wrote:
anonimo76 wrote:Hello !! I have to remove the resistor R2 "121"?
Thank you very much!!!
Image

http://it.tinypic.com/r/21cw30z/9
http://i63.tinypic.com/21cw30z.jpg
I have to connect to alfa mito 1.6 jtdm
Thanks

Hello
Nice that it now works

What interface did you buy?
Do you have a link?


Greeting Eddy
mrnixdorf
Posts: 3
Joined: 03 Mar 2017, 03:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by mrnixdorf »

hey guys,

any help with this interface i will appreciate it, i can only connect to ecu engine.

Image
Image

Thx
anonimo76
Posts: 15
Joined: 01 Dec 2013, 23:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by anonimo76 »

Alfaeddy wrote:
anonimo76 wrote:
anonimo76 wrote:Hello !! I have to remove the resistor R2 "121"?
Thank you very much!!!
Image

http://it.tinypic.com/r/21cw30z/9
http://i63.tinypic.com/21cw30z.jpg
I have to connect to alfa mito 1.6 jtdm
Thanks

Hello
Nice that it now works

What interface did you buy?

Do you have a link?


Greeting Eddy
hello, elm v. 1.5
I have to remove r2?
https://it.aliexpress.com/item/2016-Low ... 0.0.LeiDDO
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

mrnixdorf wrote:hey guys,

any help with this interface i will appreciate it, i can only connect to ecu engine.

Image
Image

Thx

Hello
And always the same questions !!!!

What vehicle?
What year?
What control?
What driver was installed?


Since the resistor only interferes with CAN bus protocols with multiecuscan.
Ergo:
No CAN bus
no problem

Greeting Eddy
mrnixdorf
Posts: 3
Joined: 03 Mar 2017, 03:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by mrnixdorf »

Alfaeddy wrote:
mrnixdorf wrote:hey guys,

any help with this interface i will appreciate it, i can only connect to ecu engine.

Image
Image

Thx

Hello
And always the same questions !!!!

What vehicle?
What year?
What control?
What driver was installed?


Since the resistor only interferes with CAN bus protocols with multiecuscan.
Ergo:
No CAN bus
no problem

Greeting Eddy
What vehicle? Peugeot 307 HDI 1.6 110cv
What year? 2006
What control? i think VAN
What driver was installed? Bluethoot "Torque"

I don't understand but it must work with all vehicles, right?
anonimo76
Posts: 15
Joined: 01 Dec 2013, 23:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by anonimo76 »

anonimo76 wrote:
Alfaeddy wrote:
anonimo76 wrote:
I have to connect to alfa mito 1.6 jtdm
Thanks

Hello
Nice that it now works

What interface did you buy?

Do you have a link?


Greeting Eddy
hello, elm v. 1.5
I have to remove r2?
https://it.aliexpress.com/item/2016-Low ... 0.0.LeiDDO
Hi, I removed the resistor r2.
The interface test is okay.
But it does not connect with multiecuscan 3.0.
With Alfaobd connects to the service, to all the functions.
What's the problem?
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy »

anonimo76 wrote:
anonimo76 wrote:
Alfaeddy wrote:

Hello
Nice that it now works

What interface did you buy?

Do you have a link?


Greeting Eddy
hello, elm v. 1.5
I have to remove r2?
https://it.aliexpress.com/item/2016-Low ... 0.0.LeiDDO
Hi, I removed the resistor r2.
The interface test is okay.
But it does not connect with multiecuscan 3.0.
With Alfaobd connects to the service, to all the functions.
What's the problem?

Hello

I thought your ELM now works after removing R2.

Apparently, I read, translated wrongly

If you can connect with AlfaOBD yes there must be a software problem. ?? !!!

What driver did you install?
anonimo76
Posts: 15
Joined: 01 Dec 2013, 23:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by anonimo76 »

drivers installed properly with Windows XP "usb340T drivers", "CH341SER", provided with the CD.
After I removed the resistance, Alfaobd connects to the service, to all the services.
Multiecuscan anything, it does not connect to the ECU, but the interface test is all ok
cxem
Posts: 28
Joined: 24 Jan 2015, 09:10
Location: Russia, Syktyvkar

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by cxem »

The most successful Chinese ELM327 adapter assembled on the chip PIC
http://cxem2.narod.ru/forum/30-3-1#3
obdspecialist
Posts: 3
Joined: 12 Jan 2017, 15:51

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by obdspecialist »

Alfaeddy wrote:Hello

@ obdspecalist

This one also ;)

http://www.ebay.de/itm/152303738760?_tr ... EBIDX%3AIT


and to an better price ;)

Greeting Eddy

This is a chinese clone with no warranty for CAN LINES :lol: :lol:
Post Reply