Im trying to access the body computer on my 03' 1.9HGT punto, which is a Marelli MY03, but there's only Info and DTC compatibility! I need to program my remote fob but it only supports the Delphi/marelli body computer for parameter actuators and adjustment!
Is it possible to add this feature or does anyone know how else to program the remote fob?
Actuator + Adjustment for Marelli MY03 Body Computer
-
Almurray42
- Posts: 2
- Joined: 13 Dec 2014, 10:21
-
alfa156sarajevo
- Posts: 870
- Joined: 12 Feb 2010, 09:03
- Location: EU, Germany
Re: Actuator + Adjustment for Marelli MY03 Body Computer
Connection schematic for 3 pin connector is OK. No need to do any other modification.
Hi,
You have 2 different remote controls types.
The first one is with possibility only to do remote control storage.
The other possibility is to program keys and remote control at the same time.
BR
Hi,
You have 2 different remote controls types.
The first one is with possibility only to do remote control storage.
The other possibility is to program keys and remote control at the same time.
BR
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
-
Almurray42
- Posts: 2
- Joined: 13 Dec 2014, 10:21
Re: Actuator + Adjustment for Marelli MY03 Body Computer
The remote key is a single button remote operating on 433.92Mhz If i remember correctly...
I can go into the Delphi/Marelli Computer and run the line for programming the remote, but it says Remote already programmed... Is this because I bought a second hand remote key or is it becuase I need a transponder chip in the key with the remote fob so that it's in the Ignition?
I can go into the Delphi/Marelli Computer and run the line for programming the remote, but it says Remote already programmed... Is this because I bought a second hand remote key or is it becuase I need a transponder chip in the key with the remote fob so that it's in the Ignition?