FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

[Alfaeddy]

Hello

This interface we had very often here
and has been repeatedly described.
With a little search you would have found it quickly.

1 markiert.jpg (147.58 KiB) Viewed 5864 times

Greetings Eddy

[PuntoHGT2002]

Hello,

@Alfaeddy

I have the Same Interface and i have removed this resistor. But i can't look into my Boardcomputer. I have the Yellow Adapter, too.

i have the Baudrate 38400 and the lowest latence, should i Change my settings?

Sorry for my bad english.

[Alfaeddy]

hello PuntoHGT2002

Then it is up to the settings or the driver
which driver you have installed?
on which operating system?

Greetings Eddy

[PuntoHGT2002]

I have Windows 7, and the driver are silabs cp210x and CH340.

Mes says check the kkl cable or your serialports settings.

[Alfaeddy]

I have Windows 7, and the driver are silabs cp210x and CH340.

Mes says check the kkl cable or your serialports settings.

Hello PuntoHGT2002

KKL Interface ????????
You have a ELM Interface


And'll try this driver choose from but the CDMv2.10.00
http://www.ftdichip.com/Drivers/VCP.htm

Greetings Eddy

[Waltomatic]

Silabs CP210x = Silicon Laboratories, Inc.

CH340 = Nanjing QinHeng Electronics Co., Ltd.

FTDI = Future Technology Devices International

Useless not want to mix ...

[PuntoHGT2002]

Hello,

@Eddy
yes i have an elm Interface But mes says check kkl Interface.
@walto
I have installed All 3 drivers because it's only work with the silabs driver

I can look in the vehicle unit without any Adapter But i can't look in the boardcomputer.

Sorry for bad english.

[leandroserra]

Good afternoon friends,

Recently bought a EML327 as attached image, however all tested APPs via android gives error interface or are trying to connect for a long time but to no avail in the end., can help me on what procedure should I do to make it work?

[Alfaeddy]

Hi Punto

You can see in the engine control unit ?? !!

Which vehicle you would like to read? Model? Bj.? Motor?
Not that we confuse something here.

One step at a time

Greetings Eddy

[Alfaeddy]

Hello lean...

Unfortunately, we are not clairvoyant
Androit?
What software do you need to read your car ??
Multiecuscan is not for use with Adroit. !!!

Which vehicle?
What Bj.
Which engine?

This is about Italian cars and the software Multiecuscan.

Without any details, we have rates

Greetings Eddy