Dura Hood 916 Spider

Report any bugs found in Multiecuscan and suggest new functionality to be implemented
Post Reply
argtv6
Posts: 29
Joined: 13 Sep 2010, 10:24

Dura Hood 916 Spider

Post by argtv6 »

Has anybody managed to connect to this module?
When I scan DTC with KL and purple connector from the the dash OBD connector only the engine ecu is seen.
When I scan DTC at the 3 pin connector in the battery compartment with or without the purple connector the Dura hood ecu is visible but impossible to connect to.
Please help
Ralph
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Dura Hood 916 Spider

Post by alfa156sarajevo »

I tried it on Brera and did worked without any problems.
Did not had chance to try on Spider... :roll:
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
argtv6
Posts: 29
Joined: 13 Sep 2010, 10:24

Re: Dura Hood 916 Spider

Post by argtv6 »

The 939 spider is completely different to the 916.
Thanks anyway.

Any ideas Yani?
I did send reports when failing to connect.
Ralph
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Dura Hood 916 Spider

Post by alfa156sarajevo »

argtv6 wrote:The 939 spider is completely different to the 916.
Thanks anyway.

Any ideas Yani?
I did send reports when failing to connect.
Ralph
Did you tried it with new MES 2.2 version?
viewtopic.php?f=6&t=4308
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
yani
Site Admin
Posts: 1173
Joined: 06 Nov 2009, 16:40

Re: Dura Hood 916 Spider

Post by yani »

Yes, please try with Multiecuscan 2.2... and use the 3-pin connector.
argtv6
Posts: 29
Joined: 13 Sep 2010, 10:24

Re: Dura Hood 916 Spider

Post by argtv6 »

Hi.
I made this post before noticing that version 2.2 is out.
I'll try it out when I'll have another 916 spider at the workshop and revert.
Thanks
Ralph
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Dura Hood 916 Spider

Post by alfa156sarajevo »

argtv6 wrote:Hi.
I made this post before noticing that version 2.2 is out.
I'll try it out when I'll have another 916 spider at the workshop and revert.
Thanks
Ralph
Any infos? :roll:
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
argtv6
Posts: 29
Joined: 13 Sep 2010, 10:24

Re: Dura Hood 916 Spider

Post by argtv6 »

Hi.
I connected successfully from the 3pin connector in the battery compartment this morning.
I still have to get accustomed to the functions and parameters of this module as the commands I gave failed.
This particular car has a fault in the 5th bow sensors and some faults shown were without a description like 0F and 0D.
One confusing fault was regarding a deployed airbag.
Thanks
Ralph
JvanEmmerik
Posts: 1
Joined: 23 Aug 2014, 15:59

Re: Dura Hood 916 Spider

Post by JvanEmmerik »

I know this is an old post but I give it a try.
I've the same error (0D airbag). Hood not opening. Did you manage to fix it?
Kind regards,
Jan.
Post Reply