Hi,
my mother has a 2001 Fiat Palio 1.9 TD or JTD (don`t know exactly) and she has some Problems with the Airbagsystem. The Car has a 3Pin Connector for the Motor ECU. After a look at the supported Vehicles, i think i need such a Interface Adapter http://www.ebay.de/itm/151016677380?ssP ... 1439.l2649 . Is that right and will that works?.
Thank you for your response
Wheely
Fiat Palio 1.9 TD JTD
-
alfa156sarajevo
- Posts: 870
- Joined: 12 Feb 2010, 09:03
- Location: EU, Germany
Re: Fiat Palio 1.9 TD JTD
Post new link or photo from the interface.
Link from above does not work...
Link from above does not work...
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Re: Fiat Palio 1.9 TD JTD
Hi,
the Link works for me
. This is the Ebay Item Nr. 151016677380
http://www.ebay.de/itm/151016677380?ru= ... 26_rdc%3D1
Wheely
the Link works for me
. This is the Ebay Item Nr. 151016677380 http://www.ebay.de/itm/151016677380?ru= ... 26_rdc%3D1
Wheely
-
alfa156sarajevo
- Posts: 870
- Joined: 12 Feb 2010, 09:03
- Location: EU, Germany
Re: Fiat Palio 1.9 TD JTD
OK! I can see link now. Yes this package is OK.
In general for your Fiat Palio you need KKL interface (or VAG 409.1 how it is called) and 3 pin adaptor.
You do not need additional adaptors: A1, A2 and A3. If you do plan to use it on other Italian cars than other 3 adaptors (A1, A2 and A3) will be helpful.
In general for your Fiat Palio you need KKL interface (or VAG 409.1 how it is called) and 3 pin adaptor.
You do not need additional adaptors: A1, A2 and A3. If you do plan to use it on other Italian cars than other 3 adaptors (A1, A2 and A3) will be helpful.
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Re: Fiat Palio 1.9 TD JTD
Hello
How alfa156sarajewo already wrote!
It is only the switchable KKL interface and the 3 pin adapter needed.
The adapter (green, red, yellow) are not required.
I have to write why he Sold this package as the seller of times?
Greetings Eddy
How alfa156sarajewo already wrote!
It is only the switchable KKL interface and the 3 pin adapter needed.
The adapter (green, red, yellow) are not required.
I have to write why he Sold this package as the seller of times?
Greetings Eddy
Re: Fiat Palio 1.9 TD JTD
Hi,
thank you for your reply`s. I have order it and can`t wait to test it. I hope i can read the fault codes of the airbag system.
Wheely
thank you for your reply`s. I have order it and can`t wait to test it. I hope i can read the fault codes of the airbag system.
Wheely
Re: Fiat Palio 1.9 TD JTD
Hi,
today the interface arrived. I have one Question. I must only use the 3Pin Adapter Cable and which switch must i select on the Interface?. When i want to connect to the Airbagsystem, i must use switch Nr. 3 (called Airbag), right?.
But on the supported Vehicle List is a information that called : "PLEASE NOTE: For the old (non-EOBD) vehicles with 3-pin diagnostic connector you need UNMODIFIED interface with 3-pin adapter.". What means unmodifified interface?, are that interfaces without switches and so i can`t use this interface that i bought?.
Wheely
today the interface arrived. I have one Question. I must only use the 3Pin Adapter Cable and which switch must i select on the Interface?. When i want to connect to the Airbagsystem, i must use switch Nr. 3 (called Airbag), right?.
But on the supported Vehicle List is a information that called : "PLEASE NOTE: For the old (non-EOBD) vehicles with 3-pin diagnostic connector you need UNMODIFIED interface with 3-pin adapter.". What means unmodifified interface?, are that interfaces without switches and so i can`t use this interface that i bought?.
Wheely
Re: Fiat Palio 1.9 TD JTD
Hello
Alfa156sarajevo and I had already written it
Is a switchable KKL interface for vehicles need the a 3 pin adapter not required.
On your link I wrote that the offer with the switchable KKL with 3 adapters (green, red, yellow) makes no sense.
When using a 3 pin adapter, the KKL interface has switchable on
the No. 7 position stand.
Since you use to access through transfer it to the controller in question.
Thus, a changeover switch is not necessary.
Greetings Eddy
Alfa156sarajevo and I had already written it
Is a switchable KKL interface for vehicles need the a 3 pin adapter not required.
On your link I wrote that the offer with the switchable KKL with 3 adapters (green, red, yellow) makes no sense.
When using a 3 pin adapter, the KKL interface has switchable on
the No. 7 position stand.
Since you use to access through transfer it to the controller in question.
Thus, a changeover switch is not necessary.
Greetings Eddy
-
alfa156sarajevo
- Posts: 870
- Joined: 12 Feb 2010, 09:03
- Location: EU, Germany
Re: Fiat Palio 1.9 TD JTD
When you have VAG cable with a mini switch on it, and you want to use 3 pin adapter for some other cars, please set the VAG interface on pin 7 (engine) - and do not move it.
So you set mini switch on pin 7 of your VAG interface, connect your 3 pin adapter on it, and than you can use it like that for all systems like abs and airbag (for older cars which have only that 3 pin connector).
No need to move switch on VAG interface. No need to set it on pin 3 or pin 1 on your VAG interface.
Just keep it fixed on pin 7 of VAG interface when you using 3 pin adapter.
So you set mini switch on pin 7 of your VAG interface, connect your 3 pin adapter on it, and than you can use it like that for all systems like abs and airbag (for older cars which have only that 3 pin connector).
No need to move switch on VAG interface. No need to set it on pin 3 or pin 1 on your VAG interface.
Just keep it fixed on pin 7 of VAG interface when you using 3 pin adapter.
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Re: Fiat Palio 1.9 TD JTD
Hi,
i did it and everythink was fine. I could connect to all three ECU (ABS,Airbag and Motor). So i could delete the faultcode of the Airbag (low power supply).
Thanks for you advise.
Wheely
i did it and everythink was fine. I could connect to all three ECU (ABS,Airbag and Motor). So i could delete the faultcode of the Airbag (low power supply).
Thanks for you advise.
Wheely