help Blue&me

[fiatuno]

Hi all, I have a big problem with my GP in 2005.
My GP originally mounted the only bluetooth "mycar" without usb socket.
I then replaced the unit and adequate electric system and new radio receiver, the system bluetooth and mediaplayer works perfectly but the flash km. If I run the proxy alignment km stop flashing but the B & M unit is turned off. To reset the unit and I mount and proxy on a GP with B & M Original. My second step was to mount the B & M NAV and Dotmatrix instrument panel plus relative electrical mod plus antenne GPS/GSM,the NAV bluetooth and mediaplayer system works perfectly but if i running proxy same story as before. Exist a way to change the configuration of my bodycomputer? The following reading my configuration.

Lettura dati configurazione CAN...
CAN CONFIGURATION DATA:
6F 84 00 05 02 00 00 00 6F 84 00 05 02 00 00 00 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6F 84 00 05 02 00 00 00 09 04 00 04 02 00 00 00 6F 84 00 05 02 00 00 00 09 04 00 04 02 00 00 00 09 04 00 04 00 00 00 00
33 38 31 39 39 30 30 30 32 38 36 4F 55 54 50 55 54 2D 4A 49 54 20 05 08 03 6F 84 00 05 02 00 00 00 09 04 00 04 02 00 00 00 C5 21 01 07 62 00 2A 20 33 00 00 06 00 00 00 94 06 01 02 00 00 00 00 00 3A 51 05 0C 0D 00 00 00 21 00 00 00 00 31 09 60
MODULI CAN ATTUALMENTE CONFIGURATI:
Body Computer (NBC)
Controllo motore (NCM)
Guida Elettrica (NGE)
Quadro Strumenti (NQS)
Radio Ricevitore (NRR)
Impianto frenante (NFR)
Climatizzatore (NCL)
Nodo Imbardata/Accelerazione Laterale (NYL)
Nodo Sensore Parcheggio (NSP)
Nodo Air Bag (NAB)
Nodo convergence
MODULI CAN ATTUALMENTE DISPONIBILI:
Body Computer (NBC)
Controllo motore (NCM)
Guida Elettrica (NGE)
Quadro Strumenti (NQS)
Radio Ricevitore (NRR)
Impianto frenante (NFR)
Climatizzatore (NCL)
Nodo Imbardata/Accelerazione Laterale (NYL)
Nodo Sensore Parcheggio (NSP)
Nodo Air Bag (NAB)
Nodo convergence
MODULI CAN CHE RICHIEDONO PROGRAMMAZIONE:
Body Computer (NBC)
Quadro Strumenti (NQS)
Climatizzatore (NCL)
Nodo Air Bag (NAB)
Nodo convergence
19/01/2013 08:58:14
CONNECTED TO:
Fiat Grande Punto 1.3 MultiJet 16V
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------

MODULI CAN ATTUALMENTE CONFIGURATI::
Body Computer (NBC):
Controllo motore (NCM):
Guida Elettrica (NGE):
Quadro Strumenti (NQS):
Radio Ricevitore (NRR):
Impianto frenante (NFR):
Climatizzatore (NCL):
Nodo Imbardata/Accelerazione Laterale (NYL):
Nodo Sensore Parcheggio (NSP):
Nodo Air Bag (NAB):
Nodo convergence:
:
MODULI CAN ATTUALMENTE DISPONIBILI::
Body Computer (NBC):
Controllo motore (NCM):
Guida Elettrica (NGE):
Quadro Strumenti (NQS):
Radio Ricevitore (NRR):
Impianto frenante (NFR):
Climatizzatore (NCL):
Nodo Imbardata/Accelerazione Laterale (NYL):
Nodo Sensore Parcheggio (NSP):
Nodo Air Bag (NAB):
Nodo convergence:
:
MODULI CAN CHE RICHIEDONO PROGRAMMAZIONE::
Body Computer (NBC):
Quadro Strumenti (NQS):
Climatizzatore (NCL):
Nodo Air Bag (NAB):
Nodo convergence:

[yani]

Please send an email with explanation to support@multiecuscan.net abot this. We can fix this problem.

[fiatuno]

Very Very tanks to yani.
With only one attempt has been able to precisely change the configuration of my body.
This was still not possible after several attempts at Accinni leonardo.
Mister yani is a GREAT GENIUS friendliest and fast.
Thank you again.
My NAV now works correctly and no longer flash odometer.

[pajeronda]

Hello Yani

I'm pajeronda
I'm searching information about possibility to add with multiecuscan Blue&Me module on the Body Computer of my car.
My car is a Alfa 159 - 2.0 SW of the year 2009.

Until now i have installed the module that works with the steering wheel controls but the odometer flashes!


thanks a lot!
__________
Pajeronda